Summary of Contents for Campania International Savannah FT-388
Page 1
FT-388 Savannah Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 20 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device •...
Page 2
FT-388 Savannah Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-388 Savannah Fountain Assembly Instructions Step 10 - Insert both CPVC ends of Tubing Assembly #1 into the CPVC couplings in the bottom of the medium bowl (FT-388D). Step 11 - Center the medium bowl (FT-388D) over the medium pedestal (FT-388E). Step 12 - Attached the clear end of Tubing Assembly #2 to the center piece of CPVC pipe protruding from the inside center of the medium bowl (FT-388E).
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - Ensure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.