Advertisement
Quick Links
Fountain Components
Image
Item Description
Palamos/
Bisbalos
Fountain Basin
Bisbalos Top
Ring
Bisbalos Urn -
Water Feature
Bisbalos
Fountain - Disc
Bisbalos
Fountain -
Pump Cover
Fountain Information:
• Three people are recommended for the installation of this fountain!
• This fountain holds approximately 20 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• Compatible with #7 Refill Device
• A special stopper is required to use the refill kit for this fountain
Pump Information:
OEMPF320 - 320 GPH Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-38C
1
FT-41A
1
FT-41B
1
FT-41C
1
FT-41D
1
FT-41 Bisbalos Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK300 Pump
(use adapter indicated)
#7 Stopper
Approx. 25" length of 1/2" black
non-kink tubing
Approx. 12" length of 1/2" black
non-kink tubing
3/8" I.D. 1/2" O.D. copper coupling
Approx. 1.5" length of 3/8" I.D.
1/2" O.D. Copper Pipe
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
1
1
Wedges
2
4
rev 4/6/2020
Advertisement
Related Manuals for Campania International FT-41
Summary of Contents for Campania International FT-41
- Page 1 FT-41 Bisbalos Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 20 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #7 Refill Device •...
- Page 2 FT-41 Bisbalos Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
- Page 3 FT-41 Bisbalos Fountain Assembly Instructions Step 8 - Using a hose clamp, connect the loose end of the 1/2" non-kink tubing connected to the pump to the copper pipe protruding from the bottom of the urn (FT-41B). Step 9 - Center and level the urn (FT-41B) on the disc (FT-41C).
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.