Bosch SHV68R53UC Use & Care Manual page 15

Extra Dry Heat:
Press and hold the Auto button, then press and hold the On/Off button.
1
2
When the LED display window indicates a "0" or "1" release both buttons.
To activate Extra Dry Heat, press the Auto button until the display indicates "1".
3
4 To disable Extra Dry Heat, press the Auto button until the display indicates "0".
Press the On/Off button to save the setting.
5
Cycle completion signal:
The cycle completion signal alerts you when a cycle completes and the dishwasher has washed and
dried the dishes. You can choose to disable the tone or adjust the volume.
To activate:
With the unit OFF, press and hold the right of the two Cancel/Reset buttons and then press and hold
1
the On/Off button.
2 When the light on the Cancel/Reset button you are pressing illuminates and the tone goes off,
release both buttons.
Press the right of the two Cancel/Reset buttons again until you achieve the desired volume or until
3
there is no tone (to turn cycle completion signal OFF).
4 Press the On/Off button to save the setting.
SHE68R5xUC and SHX68R5xUC front display key:
Sensors OK
Check water inlet
Wash
Spray pressure Do not open door
Dry
Rinse
Program progress
Sanitation rinse
13