Table of Contents
Advertisement
28
FEATURES FOR RECORDING
EN
Backlight Compensation
Backlight compensation brightens the subject
quickly.
With simple operation, backlight compensation
feature brightens the dark subject portion by
increasing the exposure.
1
Set the Power Switch to
"REC".
2
M
Set the recording mode to
"
".
pg. 18)
(
3
Press
so that the
Backlight Compensation
indicator "
" appears.
To cancel Backlight Compensation
Press
twice so that the "
disappears.
NOTE:
Using Backlight Compensation may cause the
light around the subject to become too bright and
the subject to become white.
Selection of a spot metering area enables
more precise exposure compensation.
1
2
3
Control indicator "
●
SET
4
●
●
To lock the iris
" indicator
After step 3, press and hold SET over 2
seconds. The "
iris is locked.
To cancel Spot Exposure Control
Press
disappears.
NOTES:
●
●
Spot Exposure Control
Set the Power Switch to "REC".
Set the recording mode to "
Press
twice so that the Spot Exposure
A spot metering area frame appears at the
centre of the LCD monitor/viewfinder.
Press SET.
Spot Exposure Control is engaged.
Exposure is adjusted to make the brightness of
the selected area most appropriate.
" indication appears and the
once so that the "
Depending on the shooting location and
condition, optimum result may not be attained.
"STROBE" in "EFFECT" cannot be used with
Spot Exposure Control.
M
".
pg. 18)
(
" appears.
" indicator
Advertisement
Table of Contents
