JVC GR-D750AS Instructions Manual page 24

24 MENUS FOR DETAILED ADJUSTMENT
EN
REC MODE
[SP]*: To record in the SP (Standard Play)
mode
LP: Long Play—more economical, providing
1.5 times the recording time.
* SP indicator does not appear on the screen.
NOTES:
●
If the recording mode is switched, the playback
picture will be blurred at the switching point.
●
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there
may be momentary pauses in the sound.
SOUND MODE
[12BIT]: Enables video recording of stereo
sound on four separate channels. (Equivalent
to the 32 kHz mode of previous models)
16BIT: Enables video recording of stereo
sound on two separate channels. (Equivalent
to the 48 kHz mode of previous models)
DISPLAY
The "DISPLAY" settings (except "CLOCK
ADJ.", "16:9 OUTPUT" and "BRIGHT") are
effective only for shooting.
ON SCREEN
LCD: Keeps the camcorder's display (except
the date, time and time code) from appearing
on the connected TV screen.
[LCD/TV]: Makes the camcorder's display
appear on screen when the camcorder is
connected to a TV.
DATE/TIME
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
CLOCK ADJ.
pg. 14, "Date/Time Settings"
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording.
16:9 OUTPUT
To enable your tv to display images in 16:9
wide mode, set the tv screen size correctly.
4:3 TV: For TV with an aspect ratio of 4:3.
[16:9 TV]: For TV with an aspect ratio of 16:9.
VTR
pg. 18)
(
BRIGHT
pg. 14, "Brightness Adjustment Of The
Display"
SYSTEM
The "SYSTEM" functions which are set when
the Power Switch is set to "REC" are also
applied when the Power Switch is set to
"PLAY".
LANGUAGE
[ENGLISH] / РУССКИЙ /
The language setting can be changed.
( pg. 13)
MELODY
OFF: Even though not heard while shooting,
shutter sound is recorded on the tape.
[ON]: A melody sounds when any operation is
performed. It also activates the shutter sound
effect.
PRIORITY
[LCD]: The image is displayed on the LCD
monitor when the viewfinder is pulled out while
the LCD monitor is opened.
FINDER: The image is displayed in the
viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.
DEMO MODE
OFF: Automatic demonstration will not take
place.
[ON]: Demonstrates certain functions such as
Wipe/Fader and Effects, etc., and can be used
to confirm how these functions operate.
Demonstration starts in the following cases:
●
When the Menu Screen is closed after "DEMO
MODE" is turned "ON".
●
With "DEMO MODE" set to "ON", if there is no
operation for about 3 minutes after the Power
Switch is set to "REC".
●
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for
more than 3 minutes after that, the
demonstration will resume.
NOTES:
●
If a cassette is in the camcorder, the
demonstration cannot be turned on.
●
"DEMO MODE" remains "ON" even if the
camcorder power is turned off.
/