Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SNOWJOE sunjoe SWJ805E-RM
Summary of Contents for SNOWJOE sunjoe SWJ805E-RM
- Page 1 ELECTRIC POLE + CHAIN SAW 8-INCH | 6-AMP | 2-IN-1 POLE + HANDHELD OPERATOR’S MANUAL Model SWJ805E-RM A Division of Snow Joe ® , LLC Form No. SJ-SWJ805E-RM-880E-M-V1 © 2021 by Snow Joe ® , LLC SAVE THESE INSTRUCTIONS All rights reserved. Original instructions.
-
Page 2: General Safety
ELECTRIC POLE + CHAIN SAW 8-INCH | 6-AMP | 2-IN-1 POLE + HANDHELD OPERATOR’S MANUAL Model SWJ805E-RM A Division of Snow Joe ® , LLC Form No. SJ-SWJ805E-RM-880E-M-V1 substantial non-skid footwear, and close-fitting clothing is IMPORTANT! recommended when working outdoors with power tools. Safety Instructions 10. -
Page 3: Electrical Safety
Electrical Safety WARNING! 1. Ground fault circuit interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for Electric shock may cause SEVERE INJURY or the electric pole + chain saw. Receptacles are available DEATH. Heed these warnings: having built-in GFCI protection and may be used for this •... -
Page 4: Specific Safety Rules
Specific Safety Rules Operating Tips for Chain Saws • Keep all parts of the body away from the saw chain when WARNING! SHOCK HAZARD! – To protect yourself the chain saw is operating. Before you start the chain saw, from electrocution, do not operate the electric pole + chain make sure the saw chain is not contacting anything. - Page 5 • Do not bury the guide bar nose or try to cut by boring the Kickback guide bar nose into the wood. • Watch for shifting of wood or other forces that may pinch KICKBACK the chain. DANGER ZONE • Use extreme caution when re-entering a previous cut. •...
-
Page 6: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, Keep bystanders and children and follow all instructions in the a safe distance away. -
Page 7: Technical Data
Know Your Electric Pole + Chain Saw Read the owner’s manual and safety instructions carefully before operating the electric pole + chain saw. Compare the illustration below to the electric pole + chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. -
Page 8: Carton Contents
® dealer or call the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOWJOE (1-866-766-9563). WARNING! Unpacking and assembly should be Chain/sprocket end completed on a flat and stable surface, with adequate space cover for moving the machine and its packaging. - Page 9 2. Remove the cutting bar and chain from the mounting Fig. 6 surface (Fig. 3). Fig. 3 Cutting bar Loop Chain 6. Hold the chain in position on the bar and place the loop around the sprocket. Fit the bar flush against the mounting surface so that the bar studs are in the long slot of the bar 3.
- Page 10 9. Remove all slack from the chain by turning the chain 2. While pulling the handle lock, use the other hand to grasp tensioner screw clockwise until the chain seats snugly the front hand grip and slide the removable cutting head against the bar with the drive links flush inside the bar up to remove it (Fig.
-
Page 11: Chain Saw Assembly
Chain Saw Assembly Operation 1. To remove the cutting head from the telescoping pole, Starting and Stopping PULL the cutting head lock back to release, and grasping the front hand grip, SLIDE UP to remove the cutting head (Fig. 14). CAUTION! •... - Page 12 4. To turn the tool ON, push and hold the safety lock button CAUTION! The chain will continue to run for several (located on the removable handle) with your thumb and seconds after turning off the tool. then squeeze the trigger with your fingers. Once the tool is running, you can release the safety lock button (Fig.
- Page 13 3. Extend the pole to the desired length (Fig. 21). Fig. 23 NOTE: Push poles toward each other to shorten the pole or pull them away from each other to lengthen the pole. Hex key wrench Only extend the pole to the minimum length required to reach the limb to be cut.
- Page 14 • Release the trigger ON/OFF switch as soon as the cut is Basic Cutting Procedure completed. Failure to follow proper cutting procedures will This unit is designed for trimming small branches and limbs up result in the bar and chain binding and becoming pinched to recommended 6.5 in.
-
Page 15: Bucking A Log
Basic Cutting Procedures Bucking a Log WARNING! WARNING! Do not cut limbs or trees that are larger Do not buck logs that are larger than the than the maximum cutting thickness. maximum cutting thickness. • Practice cutting a few small logs using the following Bucking is the process in which a log is cut into lengths. -
Page 16: Motor Cooling
® + Sun Joe ® customer service center at 1-866-SNOWJOE (1-866-766-9563) for all maintenance operations not foreseen in this manual. Any operation performed in an unauthorized service center or by unqualified Chain Needs Tensioning personnel will completely invalidate the warranty. -
Page 17: Chain Sharpening
Snow Joe ® + Sun Joe ® dealer or call the Snow Joe ® Sun Joe ® customer service center at 1-866-SNOWJOE (1-866-766-9563). Inspection tool Depth limiter Sharpening is necessary when: tooth • The sawdust looks like dust; • Cutting becomes more difficult;... -
Page 18: Troubleshooting Tips
If you continue or an odd sound, shut the saw OFF immediately. Remove the to experience problems or need repairs beyond these minor adjustments, please call 1-866-SNOWJOE (1-866-766-9563) power cord and check the saw for any damage. for assistance. -
Page 19: Model And Serial Numbers
Support SWJ805E-RM electric pole + chain saw ® If your Sun Joe requires service or maintenance, please call 1-866-SNOWJOE (1-866-766-9563) for assistance. Model and Serial Numbers When contacting the company, reordering parts, or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit. -
Page 20: Optional Accessories
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe ® + Sun Joe ® to provide notice of such changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOWJOE (1-866-766-9563). - Page 21 NOTES...
- Page 22 NOTES...
- Page 23 To obtain a replacement part or product, please visit Some states do not allow exclusions of incidental or consequential snowjoe.com/help or email us at help@snowjoe.com for damages so the above exclusions may not apply in all states. This warranty may give you specific legal rights in your state.
- Page 24 sunjoe.com...
Need help?
Do you have a question about the sunjoe SWJ805E-RM and is the answer not in the manual?
Questions and answers