Table of Contents
Advertisement
Quick Links
OPERATOR'S MANUAL
A Division of Snow Joe
, LLC
®
THANKS
OF A REMANUFACTURED PRODUCT.
To make sure you get the most out of
your product, be sure to register online at
to enjoy full product support.
R
ELECTRIC POLE CHAIN SAW
Model SWJ804E-RM
FOR
snowjoe.com
PASTE UPC LABEL HERE
YOUR
Form No. SJ-SWJ804E-RM-880E-V1
PURCHASE
Advertisement
Table of Contents
Related Manuals for SNOWJOE SUNJOE SWJ804E-RM
Summary of Contents for SNOWJOE SUNJOE SWJ804E-RM
- Page 1 , LLC ® Form No. SJ-SWJ804E-RM-880E-V1 THANKS YOUR PURCHASE OF A REMANUFACTURED PRODUCT. To make sure you get the most out of your product, be sure to register online at snowjoe.com to enjoy full product support. PASTE UPC LABEL HERE...
-
Page 2: General Safety
ELECTRIC POLE CHAIN SAW OPERATOR’S MANUAL Model SWJ804E-RM A Division of Snow Joe , LLC ® Form No. SJ-SWJ804E-RM-880E-V1 IMPORTANT! in moving parts. Use of heavy-duty rubber gloves, substantial non-skid footwear, and close-fitting clothing is Safety Instructions recommended when working outdoors with power tools. 10. -
Page 3: Electrical Safety
Electrical Safety hook and/or make a knot with the two cords as shown in Table 1. 1. Ground fault circuit interrupter (GFCI) protection should Table 1. Method of Securing Extension Cord be provided on the circuit(s) or outlet(s) to be used for the pole chain saw. - Page 4 • Do not allow the pole chain saw to make contact with • Use extreme caution when re-entering a previous cut. grounded objects such as pipes, fences, and metal posts. • Use the low-kickback chain and guide bar supplied with •...
-
Page 5: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand Keep bystanders and children and follow all instructions in the a safe distance away. - Page 6 Know Your Electric Pole Chain Saw Read the owner’s manual and safety instructions carefully before operating the pole chain saw. Compare the illustration below to the pole chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
- Page 7 Snow Joe + Sun Joe customer ® ® ® service center at 1-866-SNOWJOE (1-866-766-9563). WARNING! Unpacking and assembly should be completed on a flat and stable surface, with adequate space Chain for moving the machine and its packaging.
- Page 8 3. Remove the old chain from the bar. Fig. 5 NOTE: When you first purchase your pole chain saw, the chain and bar will come separately with the saw. Refer only to the instructions for fitting the chain and bar (start with step 4).
-
Page 9: Operation
8. Tighten the chain tensioner screw only enough to hold the NOTE: A cold chain is correctly tensioned when there bar and chain in place (Fig. 8), ensuring the chain is still in is no sag on the underside of the guide bar; the chain place over the sprocket. - Page 10 WARNING! Always keep your hands on the handles, KICKBACK Fig. 13 away from the chain. Do not overreach. DANGER ZONE A good, firm grip on the tool using both hands will help you maintain control. When using the pole chain saw, place one hand on the pole and the other hand on the rear handle with your thumbs and fingers encircling the pole and handle.
-
Page 11: Cutting Tips
Fig. 14 Fig. 17 Safety lock button Cord restraint Cam-lock On/Off switch 5. To turn the tool OFF, release the trigger switch (Fig. 14). WARNING! Failure to lock the telescopic pole cam-lock NOTE: Do not press the trigger switch until you are ready as directed could result in personal injury. - Page 12 • When pruning trees, it is important not to make the Fig. 19 finishing cut next to the main limb or trunk until you have cut off the farthest lying limb. This will reduce the weight and prevent stripping the bark from the main member. •...
-
Page 13: Maintenance
® ® you are cutting. at 1-866-SNOWJOE (1-866-766-9563) for all maintenance If the Saw Becomes Pinched or Trapped operations not foreseen in this manual. Any operation performed in an unauthorized service center or by unqualified 1. Wait for the blade to stop, wait five minutes for the saw to personnel will completely invalidate the warranty. - Page 14 + Sun Joe dealer or call the Snow Joe ® ® ® tooth Sun Joe customer service center at 1-866-SNOWJOE ® (1-866-766-9563). Sharpening is necessary when: Cutting edge • The sawdust looks like dust; • Cutting becomes more difficult; Depth limiter tooth •...
-
Page 15: Troubleshooting Table
You can purchase replacement parts for your Sun Joe ® live 120 V outlet. SWJ804E-RM electric pole saw online at snowjoe.com or, • Make sure that you fully depress and hold the to order by phone, contact Snow Joe... -
Page 16: Model And Serial Numbers
Support If your Sun Joe SWJ804E-RM electric pole chain saw ® requires service or maintenance, please call 1-866-SNOWJOE (1-866-766-9563) for assistance. Model and Serial Numbers When contacting the company, reordering parts, or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit. - Page 17 NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
- Page 18 NOTES...
- Page 19 To obtain a replacement part or product, please visit warranty. Some states do not allow exclusions of incidental or snowjoe.com/help or email us at help@snowjoe.com for consequential damages so the above exclusions may not apply instructions. Please be sure to register your unit beforehand to in all states.
- Page 20 snowjoe.com...
Need help?
Do you have a question about the SUNJOE SWJ804E-RM and is the answer not in the manual?
Questions and answers