Canon TS6420a Online Manual page 176

Advanced
• Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.
• TCP/IP settings
Performs IPv4 or IPv6 setting.
• WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows).
◦ Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows.
◦ Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
◦ Timeout setting
Specifies the timeout length.
• Bonjour settings
Setting items when you use Bonjour.
◦ Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
◦ Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
You cannot use the same service name as that already used for other LAN connected
devices.
• LPR protocol setting
Enables/disables the LPR setting.
• RAW protocol
Enables/disables RAW printing.
• LLMNR
176