Table of Contents
Advertisement
en Installation instructions
The appliance must be transported by two people
2.
using the carry handles on the right and left, while
securing the front of the appliance with one hand.
3.
Place the appliance in the unit and fold the carry
handles down.
Push the appliance in fully.
4.
Do not kink or trap the connecting cable, or route it
over sharp edges.
Centre the appliance.
5.
There must be an air gap of at least 5 mm between
the appliance and adjacent unit fronts.
Use a spirit level to adjust the appliance so that it is
6.
perfectly level.
38
Screw the appliance into place.
7.
23.7 Removing the appliance
Disconnect the appliance from the power supply.
1.
Undo the fastening screws.
2.
Lift the appliance slightly and pull it out completely.
3.
Advertisement
Table of Contents
