End Of Programme; Energy Management - Miele G 7200 Operating Instructions Manual

End of programme

The programme has ended when the
display shows the message 
In some programmes, if the AutoOpen
function is activated, the door will auto-
matically open slightly (see "Settings"
chapter, "AutoOpen" section). This im-
proves the drying process.
If the Consumption
tion is switched on, you can now call up
the actual energy and water consump-
tion of the programme that has just fin-
ished (see "Caring for the environment"
chapter, "EcoFeedback consumption
indicator" section).
The drying fan may continue to run for
a few minutes at the end of the pro-
gramme.

Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate work-
tops when you open the door at the
end of the programme if the fan is no
longer running.
If you have deactivated the auto-
matic door opening function (see
"Settings" chapter, "AutoOpen" sec-
tion), but would still like to open the
door at the end of the programme,
then make sure that you open the
door fully.
Finished
programmable func-

Energy management

To save energy, the dishwasher will
. switch off automatically 10 minutes
after the last time a button is pressed or
after the end of a programme.
You can switch the dishwasher back on
again with the  button.
The dishwasher will not switch itself
off whilst a programme is running or if
there is a fault.
Operation
55