Pip (Picture-In-Picture) - ViewSonic VP2786-4K User Manual

PIP (Picture-in-Picture)

To configure PIP:
1. Move the Joy Key
and press the l key to display the OSD Menu.
2. Move the Joy Key
the Setup Menu menu.
3. Move the Joy Key
its sub-menu.
4. Move the Joy Key
menu.
5. To change the input source for the Inset Window, select PIP Source Select and
press the l key. Then move the Joy Key
and press the l key to confirm.
6. To adjust the Inset Window position, select PIP Position and press the l key.
ͫ Press the l key to select PIP H.Position or PIP V.Position.
ͫ Move the Joy Key
confirm.
7. To adjust the Inset Window size, select PIP Size and press the l key. Then move
the Joy Key or
p
8. To swap the two windows, select Swap and press the l key to confirm.
to display the Startup Menu. Then navigate to Main Menu
t
to select Setup Menu. Then press the l key to enter
or
p q
or to select Multi-Picture. Then press the l key to enter
p q
or to select PIP. Then press the l key to enter its sub-
p q
or to adjust the setting and press the l key to
p q
to adjust the setting.
q
Main Window
Inset Window
or to select the desired input source
p q
57 57