Table of Contents
Advertisement
To enable PBP mode:
1. Move the Joy Key
and press the l key to display the OSD Menu.
2. Move the Joy Key
to enter the menu.
3. Move the Joy Key
its sub-menu.
4. Move the Joy Key
PBP mode.
To activate the KVM function:
1. Press and hold the
2. Then you will be able to switch the cursor between the two screens (left/right
window).
to display the Startup Menu. Then navigate to Main Menu
t
or
to select the Setup Menu menu. Then press the l key
p
q
or
to select Multi-Picture. Then press the l key to enter
p
q
or
to select PBP Left-Right. Then press the l key to enable
p
q
key for two (2) seconds to activate the KVM function.
u
3840 x 2160 @ 60Hz
51 51
VP2786-4K
Advertisement
Table of Contents
