ViewSonic VP2771 User Manual
  1. Manuals
  2. Brands
  3. ViewSonic Manuals
  4. Monitor
  5. VP2771
  6. User manual

ViewSonic VP2771 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

VP2771
Display

User Guide

IMPORTANT: Please read this User Guide to obtain important information on
installing and using your product in a safe manner, as well as registering your
product for future service. Warranty information contained in this User Guide will
describe your limited coverage from ViewSonic Corporation, which is also found on
our web site at http://www.viewsonic.com in English, or in specific languages using
the Regional selection box in the upper right corner of our website. "Antes de operar
su equipo lea cu idadosamente las instrucciones en este manual"
Model No. VS16503

Advertisement

Table of Contents
loading

Related Manuals for ViewSonic VP2771

Summary of Contents for ViewSonic VP2771

  • Page 1: User Guide

    Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
  • Page 2 Thank you for choosing ViewSonic As a world leading provider of visual solutions, ViewSonic is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well.

  • Page 3: Table Of Contents

    Contents 1. Cautions and Warnings ........1 2. Getting Started ........... 4 2-1. Package Contents ............. 5 2-2. The Exterior of the Monitor ..........6 2-3. Hardware Installation ............7 2-4. Quick Installation ............. 14 2-5. Power On ................ 19 3.
  • Page 4 7. Cleaning and Maintenance ......66 Safe Cleaning Practices ............66 8. Compliance Information ........68 8-1. FCC Compliance Statement ........... 68 8-2. Industry Canada Statement ..........69 8-3. CE Conformity for European Countries ......69 8-4. Declaration of RoHS2 Compliance ......... 70 8-5.

  • Page 5: Cautions And Warnings

    1. Cautions and Warnings 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings and follow all instructions. 4. Sit at least 18” / 45cm from the monitor. 5. When installing the monitor, please leave 10cm of open space around the monitor for ventilation safety purposes.
  • Page 6 15. If smoke appears, an abnormal noise, or a strange odor is present, immediately switch the display off and call your dealer or ViewSonic. It is dangerous to continue using the display. 16. Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug.
  • Page 7 22. Refer all servicing to qualified service personnel. Service will be required when the unit has been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped.

  • Page 8: Getting Started

    2. Getting Started Should problems arise and the product you have purchased needs to be returned for any reason, please keep the original packaging, registration form, and receipt. Having these items will make it easier for you to verify your product and repair, refund and/or return your product to you.

  • Page 9: Package Contents

    Please contact your local reseller for more information. The INF file ensures compatibility with Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install both the INF and ICM files.

  • Page 10: The Exterior Of The Monitor

    2-2. The Exterior of the Monitor A. Front B. Left and Right C. Rear 1. Control panel (Expanded in 3-1) 2. I/O port (input/output) This area should include all I/O connection options, as well as the power input connector (Expanded in 2-4) 3.

  • Page 11: Hardware Installation

    2-3. Hardware Installation A. Base Attachment B. Base Removal Procedure Procedure...
  • Page 12 C. Adjusting the Monitor’s Height - Push the top of the monitor downward until it is at the desired viewing height for use. - You can also pull the monitor back up, to the desired viewing height for use.
  • Page 13 D. Adjusting the Angle - After adjusting the monitor’s height, stand in front of the monitor so it is centered in front of you. - The angle of the screen can be adjusted by moving the panel, angling it forward or back. It can be adjusted from -5° to 21° for a flexible, comfortable viewing experience*.
  • Page 14 E. Pivot Feature 1. Lift/raise the monitor as high as it can go (max height). 2. Adjust the monitor, angling the top back and pull the bottom forward (see the below picture for reference).
  • Page 15 3. Rotate the monitor clockwise and counterclockwise, (see the below picture for reference). 4. Finish the monitor installation by fully rotating the monitor 90°(see the below picture for reference).
  • Page 16 F. Wall Mounting (Optional) NOTE: For use only with a UL Listed Wall Mount Bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic or your local dealer. Refer to the instructions that come ® with the base mounting kit. To convert your display from a desk- mounted to a wall-mounted display, do the following: 1.
  • Page 17 G. Using the Kensington Lock The Kensington security connector is located on the back side of the monitor. For more information on installation and usage please visit the Kensington website at http://www. kensington.com. Below is an example of setting up the Kensington lock on a table for your reference.

  • Page 18: Quick Installation

    3. Connect the video cable from the LCD monitor to the computer. Macintosh users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter. To order a ViewSonic Macintosh adapter, contact ViewSonic ® Customer Support.
  • Page 19 A. Power Cable (and AC/DC adapter if required) Connect the female connector of AC power cord to the power connector of monitor, and the AC plug of AC power cord to the AC outlet. B. Video and Audio Cable Connect one end of the DisplayPort cable to the DisplayPort or mini DP connector on the rear of the monitor*.
  • Page 20 * Please do not connect the DP out on the monitor to the DisplayPort or mini DP connector on the computer. DP out is used for daisy chain connection (Explained in section D) C. USB Cable Connect the B type connector of USB cable to the USB 3.0 upstream port on the rear of the monitor.
  • Page 21 Please make sure your Type-C output device and cable support Video signal transmission. Some Type-C device and cable only support power charging and data transfer function. Or you can contact ViewSonic Customer Support to order an Type-C Video cable. Type-C...
  • Page 22 *The number of monitors you can connect through DisplayPort daisy chain is up to four moitors, depends on the monitor resolution. For example, you can connect 4*VP2468 (1920x1080) or 2*VP2771 (2560x1440) or 1*VP2771+2*VP2468. *To speedup DisplayPort daisy chain handshaking process, suggest to disable Input source auto detect function.

  • Page 23: Power On

    (LCD monitor before computer) is important. NOTE: Windows users may receive a message asking them to install the INF file. To access the file, please insert ViewSonic CD into Computer’s CD drive and locate within the following directory “:\ CD\vsfiles”.
  • Page 24 DisplayPort 1.2 mode set to On *Highlight and select the DISPLAYPORT1.2 function VP2468 Manual Input Audio View Color Setup Select Adjust Mode Adjust Image Adjust Menu ECO Mode DisplayPort 1.2 DDC/CI Save As All Recall 1980 x 1080 @ 60Hz * Enable MST mode from graphic card (if required) * Link displays through DP and DP out as the examples below * Bandwidth up to 5.4G x4 Lans...

  • Page 25: Adjusting The Screen Image

    3. Adjusting the Screen Image 3-1. Using the Control Panel Use the buttons on the front or rear control panel to display and adjust OSD……...
  • Page 26 Bezel & OSD symbol explanation The bezel symbol explanation is stated below: Standby Power On/Off NOTE: Power light Blue = ON Orange = Power Saving Display the Menu by pressing any Function button.
  • Page 27 The OSD Menu and OSD Quick-Menu Symbol explanations and their functional uses are stated below. Activation symbol to turn the various modes on when operating the menu system. Activation symbol to exit, go back or deactivate the desired function that is selected. Scrolls through menu options and adjusts the monitor controls.
  • Page 28 The Quick-Menu symbol explanation is stated below: 1. To display the Quick Menu, press any one of the button on the slim bezel [ NOTE: All OSD menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable through the OSD timeout setting in the setup menu.

  • Page 29: Monitor Optimization

    PC has finished booting up, your PC should auto- detect the monitor. If your monitor came with a ViewSonic driver installation CD, now is the time to insert the CD into your CD-ROM and follow the steps when prompted. If the CD does not properly install the driver, please download the driver from the ViewSonic website or visit a ViewSonic service center.
  • Page 30 To ensure auto-detection is successful, go to ‘Advanced Display Settings’ under your system ‘Display Settings’ (screen resolution) window. There you can verify your ViewSonic monitor has been recognized by your PC in the ‘Color Management’ section of your advanced settings.

  • Page 31: Setting The Timing Mode

    3-4. Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1920 x 1080P) and refresh rate (or vertical frequency; example 60 Hz). After setting the timing mode, use the OSD (On-screen Display) controls to adjust the screen image.

  • Page 32: Additional Software Installation (Optional)

    3-5. Additional Software Installation (Optional) 1. Load the ViewSonic CD on your CD/DVD drive. 2. Double click on the "Software" folder and choose an application, if desired. 3. Double click on the .exe file or .pkg file and follow the onscreen instructions to complete the simple installation for each additional software/application.

  • Page 33: Monitor Firmware Update (Optional)

    Step1. Check and download the Firmware Update Tool with latest firmware version for your monitor from http://color.viewsonic.com/support/software/ Step2. Make sure your monitor USB upstream port has been connected to the PC USB downstream port. (Refer to 2-4.
  • Page 34 Step4. Launch the Firmware Update Tool, the application will auto detect and verify your monitor model and current firmware version. Click Update to upgrade your monitor firmware. VP Series USB Firmware Update Tool v1.0 Model Name Model Name Current Firmware Current Firmware New Firmware New Firmware...

  • Page 35: Auto Pivot (Optional)

    The application installation file is in the software folder of ViewSonic CD. Or you can check and download the latest version Auto Pivot application from http://color.viewsonic.com/support/software/...

  • Page 36: Colorbration (Optional)

    The monitor comes with Colorbration application. The application installation file is in the software folder of ViewSonic CD. Or you can download the latest version from http://color.viewsonic.com/support/software/ Standard monitor packing does not contain the color sensor which Colorbration application need to work with.

  • Page 37: Osd Menu Introduction

    4. OSD Menu Introduction 4-1. OSD Menu Tree For an explanation of the OSD tree and pertaining functions, please refer to the 4-2 OSD explanation below. The OSD tree visually represents the complete OSD menu that can be accessed by your monitor.
  • Page 38 Preset Color Contrast / Brightness Input Select Menu Exit Startup Menu sRGB SMPTE-C REC709 DICOM SIM Preset Color Native iphone color (sRGB) CAL 1 CAL 2 CAL 3 Advance Mode Contrast/Brightness (-/+, 1~100) mini DP DISPLAYPORT Input Select HDMI 1 Type C Menu Refer to Menu OSD Table for detail items...

  • Page 39: Input Select

    VP2771 View Color Manual Input Audio Setup Select Adjust Mode Adjust Image Adjust Menu miniDP DISPLAYPORT HDMI TYPE C 2560 × 1440 @ 60Hz Menu mini DP DISPLAYPORT Input Select HDMI Type C (-/+, 0~100) Volume Audio Adjust Mute...
  • Page 40 Menu FPS 1 FPS 2 Game MOBA Movie Text UltraClear Ultra Clear (-/+, 0~10) Advanced (-/+, 0/25/50/75/100) CAD/CAM Sharpness (-/+, Advanced Gamma 1.8/2.0/2.2/2.4/2.6) Ultra Clear (-/+, 0~10) ViewMode Advanced Animation Designer (-/+, 0/25/50/75/100) Sharpness Black stabilization (-/+, 0~10) Ultra Clear (-/+, 0~10) Advanced (-/+, 0/25/50/75/100)
  • Page 41 Menu Contrast/ Contrast (-/+, 0~100) Brightness (-/+, 0~100) Brightness Bluish Cool Color Native Temperature Warm Bluish Auto (Full Range) RGB (Limited Color Format Range) (Full Range) YUV (Limited Color Adjust Range) Gamma sRGB SMPTE-C Preset Color REC 709 DICOM SIM Mode Native iPhone (sRGB)
  • Page 42 Menu (-/+, 0~100) Gain Green (-/+, 0~100) Blue (-/+, 0~100) (-/+, 0~100) Offset Green (-/+, 0~100) Blue (-/+, 0~100) (-/+, 0~100) Green (-/+, 0~100) Blue (-/+, 0~100) Advance Mode Cyan (-/+, 0~100) Magenta (-/+, 0~100) Yellow (-/+, 0~100) (-/+, 0~100) Color Adjust Green (-/+, 0~100)
  • Page 43 Menu English Français Deutsch Español Italiano Suomi Language Русский Türkçe 日本語 한국어 繁體中文 简体中文 Resolution Notice Information OSD Timeout (-/+, 5/15/30/60) Setup Menu OSD Background Auto 0° +90° OSD Pivot -90° 180° Power Indicator Auto Power Off 30 Minutes 45 Minutes Sleep 60 Minutes 120 Minutes...
  • Page 44 Menu Ambient Light HAL Luminance (-/+, 0~100) Sensor MAL Luminance (-/+, 0~100) LAL Luminance (-/+, 0~100) Presence Level 1 Level 2 Sensor Level 3 miniDP Left Source DisplayPort HDMI Select Type C PBP Left-Right miniDP Setup Menu Right Source DisplayPort HDMI Select Type C...
  • Page 45 Menu sRGB SMPTE-C REC709 DICOM Native iPhone (sRGB)/(VSCN only) CAL 1 CAL 2 CAL 3 Advanced Mode FPS 1 Setup Menu Dual Color FPS 2 MOBA Movie Text Mono CAD/CAM Animation Video Edit Custom Standard ECO Mode Optimize Conserve Displayport 1.2 Setup Menu DDC/CI USER 1...

  • Page 46: Osd Menu Explanation

    Auto Detect The Auto-Detect function is not supported by VP2771. Black stabilization ViewSonic’s Black stabilization provides heightened visibility and detail by brightening dark scenes.
  • Page 47 Color adjust Provides several color adjustment modes, to help adjust the color settings to fit our users’ needs. Color Format Adjusts the color range, allowing users to adjust the range and color spacein RGB and YUV color settings. Color temperature Allows users to select specific color temperature settings to further customize their viewing experience.
  • Page 48 (Full Range) The input signal color format is YUV and the black white level is limited (Limited Range) Color Calibration User can calibrate the monitor by ViewSonic Colorbration application with specific color sensor. Options Explanation CAL1 Display with the 1...
  • Page 49 Displays the timing mode (video signal input) coming from the graphics card in the computer, the LCD model number, the serial number, and the ViewSonic® website URL. See your graphics card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency).
  • Page 50 Low input lag ViewSonic offers low input lag, utilizing a monitor process reducer, which decreases signal latency. Under the low input lag submenu, you can select the appropriate speed for your desired use from the two options Manual image adjust Displays the Manual Image Adjust menu.
  • Page 51 Overscan Can be used to adjust the aspect ratio of the input signal received by your monitor to adjust the image so it appears on the monitor. OFFSET Adjusts black levels for red, green and blue. The gain and offset functions allow users to control the white balance for the upmost control when manipulating contrast and dark scenes.
  • Page 52 Response time Adjusts the response time, creating smooth images without streaking, blurring or ghosting. A low response time is perfect for the most graphic- intense gaming, and provides amazing visual quality while watching sports or action movies. Resolution notice The notice tells users that the current viewing resolution is not the correct native resolution.
  • Page 53 The Uniformity Correction function compensates any luminance and color uniformity imbalance on the screen, such as dark spots, uneven brightness, or illegible images on the screen. With the ViewSonic uniformity correction function, gray-scale levels become more balanced, and delta E scores are improved which increases reliability and provides the highest quality viewing experience from every monitor.

  • Page 54: Advanced Settings Explanation

    Their functional use and instructions on setup are below. 1. Mult-Picture Activate your OSD menu Step 1: press the ‘1’ on your ViewSonic Monitor bezel, to open the OSD (on screen display) Step 2: Use the arrows to select the ‘Setup menu’ feature Step 3: Use the arrow (buttons) to select the ‘Multi-Picture’...
  • Page 55 1-1. For PBP Left-Right Choose your source in the ‘source select’ sub-menu PBP Options Choose 1 Mini DP Left Source DisplayPort HDMI Right Source type-c In PBP mode, please adjust the screen resolution to 1280x1440 in order to display full-sized main-picture and sub-picture images. Input Audio View...
  • Page 56 2. PIP Under the PIP options choose which function you would like to adjust: PIP Position PIP Size PIP Swap 2-1. PIP Position Choose one to adjust the smaller screen’s position: PIP H. Position adjusts the horizontal position of the smaller screen on a range from 0-100, with 0 starting from the left position of the screen and 100 starting from the right position of the screen.
  • Page 57 3. Dual Color Monitor comes with dual color engine to display two different color settings in PIP or PBP mode. Compare to main window, you can set different color preset modes in sub-window. 4. Ambient light sensor and Presence sensor Ambient light sensor: Automatically adjusts the brightness to the optimal setting based on the brightness level of the environment.
  • Page 58 5. KVM function KVM: Type- C KVM function is hardware device that allows user to control two PC’s from one keyboard and mouse.(Only work on PBP mode) Connect Setting 1. Connect one end of the Type C cable to the Type c connector on the rear of the monitor.
  • Page 59 OSD Setting for Type-C KVM Step 1: Active your OSD Step 2: Select the” Setup Menu” Step 3: Select the “Multi-Picture “ menu Step 4: Selcet the” PBP Left-Right “ menu Short cuts key for KVM In PBP mode, press and hold the # 1 key for 1 sec to activate the KVM function and switch the cursor between the main picture and the sub-picture.
  • Page 60 Dual Color: The monitor comes with a dual color engine to display two different color setting in PIP or PBP mode. You can set different color presets in both the main picture and the sub-picture. Step 1: Active your OSD Step 2: Select the”...
  • Page 61 Ambient light sensor: Automatically adjusts the monitor’s brightness to the optimal settings based on the level of brightness in your environment. Step 1: Active your OSD Step 2: Select the ”Setup Menu” Step 3: Select the “Ambient light sensor“ menu Input Audio View...
  • Page 62 Presence Sensor & Ambient Light Sensor Approx. Max 100 cm Approx. Max 100 cm Approx. 30° Approx. 30° The Presence Sensor is capable of detecting movements vertically and horizontally. Interference with the Presence Sensor may occur if the monitor height is positioned under 16 cm. Note: In order to avoid sensor interference, please remove any protective stickers from around the sensor...
  • Page 63 Blue light filter Shortcuts key for Low Blue Light Press the #5 key to immediately activate the Low Blue Light function (w/signal) Key Buttons...

  • Page 64: Advanced Settings For Gamers

    4-4. Advanced Settings for Gamers These settings have been explained in the OSD menu section above. Their functional use and instructions on setup are below. 1. Low Input Lag Step 1: Activate your OSD Step 2: Select the “Manual Image Adjust” menu Step 3: Select the “Advanced Image Adjust”...

  • Page 65: Monitor Setting Management

    4-5. Monitor Setting Management VP2468 Input Audio View Color Manual Setup Select Adjust Mode Adjust Image Adjust Menu Language AMD FreeSync Resolution Notice Information OSD Timeout OSD Background OSD Pivot Power Indicator Auto Power Off Sleep Multi-Picture 1980 x 1080 @ 60Hz The monitor power management menu options are highlighted above.
  • Page 66 Auto Power Off Selecting Auto Power Off, allows the monitor to shut its power off after a certain amount of time. Sleep This setting allows users to adjust the time of inactivity before the monitor goes on a reduced power mode. The screen will be on ‘sleep mode’...

  • Page 67: Specifications

    5. Specifications Type TFT (Thin Film Transistor), Active Matrix 2560 x 1440 LCD, 0.2331 mm x 0.2331 mm pixel pitch Display Size Metric: 68.47 cm Imperial: 27” (27” viewable) Color Filter RGB vertical stripe Glass Surface Anti-Glare Input Signal Video Sync TMDS digital (100ohms) :15-130 Khz, f :24-120 hz...
  • Page 68 <0.3W Macintosh computers may require a ViewSonic Macintosh ® adapter. To order an adapter, contact ViewSonic. Do not set the graphics card in your computer to exceed these timing mode; doing so may result in permanent damage to the display.

  • Page 69: Troubleshooting

    Loose or broken pins in the cable connector could cause an improper connection. • Connect the display to another computer. • If you have an older graphics card, contact ViewSonic® for a non-DDC adapter. Control buttons do not work...

  • Page 70: Cleaning And Maintenance

    7. Cleaning and Maintenance Safe Cleaning Practices • Make sure the display is turned off. • Never spray or pour any liquid directly onto the screen or case. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
  • Page 71 Some chemical cleaners have been reported to damage the screen and/or case of the display. • ViewSonic will not be liable for damage resulting from use of any ammonia or alcoholbased cleaners. Caution: Handle the monitor on the edges only.

  • Page 72: Compliance Information

    8. Compliance Information NOTE: This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on unit. 8-1. FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause...

  • Page 73: Industry Canada Statement

    8-2. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) 8-3. CE Conformity for European Countries The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/ EU (WEEE).The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but...

  • Page 74: Declaration Of Rohs2 Compliance

    8-4. Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:...
  • Page 75 Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below: Examples of exempted components are: 1. Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for special purposes not exceeding (per lamp): (1) Short length (≦500 mm): maximum 3.5 mg per lamp.

  • Page 76: Indian Restriction Of Hazardous Substances

    0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule. 8-6. Product Disposal at End of Product Life ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing.

  • Page 77: Copyright Information

    ® for energy efficiency. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

  • Page 78: Service Information

    Warranty and entitles you to receive new product updates and information if desired. Please complete this form to register your new product, then mail/fax to ViewSonic using the information provided on the following page. Items marked with an asterisk (*) are required.

  • Page 79: Customer Service

    NOTE: You will need the product serial number. Asia pacific Country/ Website T= Telephone Email Region C = CHAT ONLINE T= 886 2 2246 3456 ViewSonic service@tw.viewsonic. http://www.viewsonic.com.tw/ F= 886 2 2249 1751 Corporation Toll Free= 0800 061 198 service.cn@ China www.viewsonic.com.cn T= 4008 988 588 cn.viewsonic.com...
  • Page 80 T (Numéro vert)= 1-866-463- 4775 service.ca@viewsonic. Canada www.viewsonic.com T= 1-424-233-2533 F= 1-909-468-3757 www.viewsoniceurope.com/de/ service_ch@ Suisse www.viewsoniceurope.com/de/ support/call-desk/ viewsoniceurope.com Belgique www.viewsoniceurope.com/fr/ service_be@ www.viewsoniceurope.com/fr/ (Français) support/call-desk/ viewsoniceurope.com Luxembourg www.viewsoniceurope.com/fr/ service_lu@ www.viewsoniceurope.com/fr/ (Français) support/call-desk/ viewsoniceurope.com www.viewsoniceurope. www.viewsoniceurope.com/de/ service_deu@ Deutschland support/call-desk/ viewsoniceurope.com com/de/ www.viewsoniceurope.
  • Page 81 C= http://www.viewsonic.com/ soporte@viewsonic. www.viewsonic.com/la/ (Mexico) la/soporte/servicio-tecnico Nexus Hightech Solutions, Cincinnati #40 Desp. 1 Col. De los Deportes Mexico D.F. Tel: 55) 6547-6454 55)6547-6484 Other places please refer to http://www.viewsonic.com/la/soporte/servicio-tecnico#mexico Latin America C= http://www.viewsonic.com/ soporte@viewsonic. www.viewsonic.com/la/ (Peru) la/soporte/servicio-tecnico service@ Middle East ap.viewsonic.com/me/...

  • Page 82: Limited Warranty

    Display ® What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
  • Page 83 Removal or installation of the product. Causes external to the product, such as electrical power fluctuations or failure. Use of supplies or parts not meeting ViewSonic’s specifications. Normal wear and tear. Any other cause which does not relate to a product defect.
  • Page 84 3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. 4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic. Limitation of implied warranties:...
  • Page 85 Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product,...
  • Page 86 Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer. The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card.

  • Page 87: Mexico Limited Warranty

    Display ® What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
  • Page 88 Causes external to the product, such as electrical power fluctuations or failure. Use of supplies or parts not meeting ViewSonic's specifications. Normal wear and tear. Any other cause which does not relate to a product defect.
  • Page 89 How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support page). You will need to provide your product's serial number, so please record the product information in the space provided below on your purchase for your future use.
  • Page 90 Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product,...
  • Page 91 Tel: 01(52)95-15-15-22-22 E-Mail: rrrb@sureste.com Fax: 01(52)95-15-13-67-00 E-Mail. gpotai2001@hotmail.com Tijuana: FOR USA SUPPORT: ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 381 Brea Canyon Road, Walnut, CA. 91789 USA Col 20 de Noviembre Tel: 800-688-6688 (English); 866-323-8056 (Spanish); Tijuana, Mexico E-Mail: http://www.viewsonic.com...

Table of Contents