Table of Contents
Advertisement
DIR-615S Wireless N300 Router
User Manual
Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection
To create a connection of the IPv6 PPPoE or PPPoE Dual Stack type, click the Add button on the
Net / WAN page. On the opened page, select the relevant value from the Connection Type drop-
down list and specify the needed values.
Figure 66. The page for creating a new IPv6 PPPoE connection. The General settings section.
Parameter
Interface
Name
Enable
Direction
General settings
A physical or virtual interface to which the new connection will be
assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 79 of 180
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
