Table of Contents
Advertisement
DIR-615S Wireless N300 Router
User Manual
Creating PPTP/L2TP + Static IP or PPTP/L2TP + Dynamic IP WAN Connection
To create a connection of the PPTP + Static IP, L2TP + Static IP, PPTP + Dynamic IP, or L2TP +
Dynamic IP type, click the Add button on the Net / WAN page. On the opened page, select the
relevant value from the Connection Type drop-down list and specify the needed values.
Figure 87. The page for creating a new PPTP + Static IP connection. The General settings section.
Parameter
Interface
Name
Enable
Direction
General settings
A physical or virtual interface to which the new connection will be
assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 99 of 180
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
