Advertisement
R0E424270CFLE0
5. Connection Procedure
The procedure for connecting the R0E424270CFLE0 is shown
below.
(1) Mount the NQPACK120SE-ND on the user system.
(2) Attach the YQPACK120SE on the NQPACK120SE-ND.
(3) Secure the four corners of the YQPACK120SE with the
YQ-GUIDEs.
● Do NOT use the screws included with the
YQPACK120SE for fixing the YQPACK120SE.
● Do NOT use the screwdriver included with the
NQPACK120SE-ND for fixing the YQ-GUIDEs. That
is used only for the HQPACK120SE.
(4) Mount the R0E424270CFLE0 on the YQPACK120SE.
(5) Attach the flexible cable R0E001000FLX10 of the
emulator to the R0E424270CFLE0.
6. External Dimensions and a Sample Foot Pattern
35.00
TP1
TP3
100
1
1
100
CN2
CN1
51
50
50
51
TP4
MADE IN JAPAN
6.00
6.00
Figure 4 External dimensions and a sample foot pattern of the R0E424270CFLE0
REJ10J2099-0200 Rev.2.00
Apr 16, 2010
(See Figure 3)
7.50
TP2
7.50
(5)
(4)
(2)
(1)
●: No.1 pin
Be sure to align the pins.
Figure 3 Connection procedure of the R0E424270CFLE0
0.2
0.4
13.00
17.00
User's Manual
Flexible cable
R0E001000FLX10
R0E424270CFLE0
Use a slotted screwdriver.
YQ-GUIDE (×4)
YQPACK120SE
(3)
NQPACK120SE-ND
120-pin 0.4mm pitch
(PLQP0120LA-A)
foot pattern
Unit: mm
Page 2 of 4
Advertisement
