Connection Test; Setting Status - Sanyo FW65C78F Owner's Manual

Proxy configuration
2
Use H I to select Proxy configuration, then press OK.
3
Use H I to select a setting, then press OK.
Network selection Proxy setting
Wireless network setting Proxy address
IP configuration Proxy port
Proxy configuration
Do not use is selected for default settings.
●
If you need to change the proxy setting as instructed by your
●
internet service provider to set the designated proxy address
and port, select Use.
Do not use Does not use the proxy server.
Proxy
setting
Use Uses the proxy server.
Selects the number or word by using
*
Proxy address
H I J K, then press OK.
Use H I or the NUMBER buttons to
*
Proxy port
input numbers.
* Items can be selected only when Proxy setting is set to Use.
Note(s)
The range of input numbers for the port number is between 0 and 65535. (If
●
you enter a number larger than 65535, it will be regarded as 65535.)
For proxy port, the selected ports may be blocked and not be able to use
●
depending on your network environment.
If the proxy address is entered with blank only, proxy server setting will be set
●
to Do not use.

Connection test

Perform the following steps to test your internet connection after you
have connected an Ethernet cable or entered network settings such
as IP address, DNS settings, etc. manually.
Do not use
1
Use
Home network
2
If the connection test for both home network and internet pass, you are ready
●
to use Apps or network upgrade functions using the internet without making
any additional settings.
If the connection test fails, check if the Ethernet cable is connected to this TV
●
properly or if you have entered all the required details for the wireless LAN
connection properly.

Setting status

You can check the status of network settings.
1
Use H I to select Connection test, then press OK.
Connection test will start automatically and the test result for
●
home network and internet will appear right after the
connection test finishes.
"Testing..." is displayed while the connection test is in
●
progress.
Internet
Connection test is successfully
Pass Pass
completed.
Connection test for home
Fail - network failed. Check the
connection settings.
Connection test for internet
failed. Check the connection
Pass Fail
settings.
If the connection test for internet passes, speed test will start
●
automatically.
Press OK to go to the list on network status confirmation screen.
Note(s)
Use H I to select Setting status, then press OK.
Network setting list will be displayed.
●
MAC address of this unit will be displayed in the list.
●
44 .
English
Description
Continued on next page.