Sanyo FW65C78F Owner's Manual page 17

HDMI-ARC connection
HDMI-ARC allows you to use HDMI-CEC to output TV audio directly
to a connected audio device, without the need for an additional digital
audio cable.
HDMI 2 IN only
HDMI cable
Note(s)
The HDMI 2 connector is HDMI Audio Return Channel (ARC) compliant. Use it
●
to output digital audio to an HDMI home theater system.
Be sure that the device is HDMI CEC and ARC compliant and that the TV is
●
connected to the device using an HDMI cable attached to HDMI-ARC
connectors.
Component analog video connection
Component analog video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit's component video (Y/Pb/Pr) input jacks,
connect analog audio cables to the analog audio (L/R) input jacks.
Audio (L/R) cables
IN
Component
IN
(Y/Pb/Pr) video cables
Note(s)
The unit accepts 480i, 480p, 720p, 1080i and 1080p of video signals for this
●
connection.
OUT
Digital home theater
amplifier that
supports HDMI-ARC
Set-top box
OUT
or
OUT
Blu-ray Disc™ /
DVD recorder
Composite analog video connection
Composite analog video connection offers standard picture quality
for video devices connected to the unit.
If you connect to the unit's component / composite video (Y/VIDEO)
input jack (green), connect audio cables to the audio (L/R) input jacks.
When the audio is monaural, then only connect to the audio L input
jack.
IN
Video + Audio (L/R)
cables
Note(s)
With this unit, yellow cable must be connected to Y (green) jack on the
●
component video input jacks.
Whenever you connect to the composite video input jack (Y/VIDEO), you must
●
disconnect the component video input jacks (Pb and Pr). If you leave those jacks
connected, it may cause an unstable picture.
Connecting the TV to the internet using an Ethernet
cable
Ethernet cable
Note(s)
Please purchase shielded Ethernet cables at your local store and use them when
●
you connect to network equipment.
After connecting an Ethernet cable, set up necessary network settings.
●
Connect to network L p. 41
Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid
●
damaging the unit.
If your telecommunications equipment (modem, etc.) does not have broadband
●
router functions, connect a broadband router.
If your telecommunications equipment (modem, etc.) has broadband router
●
functions but there is no vacant port, then add a hub.
For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
●
Do not connect your PC directly to the Ethernet port of this unit.
●
17 .
English
OUT
DVD player
Internet
LAN
Network provisioning
equipment
Continued on next page.