Connections; Notes On Connections - Panasonic PT-L780U Operating Instructions Manual

Connections

Notes on connections

B Read the instruction manual for each system component carefully before
connecting it.
B Turn off the power supply for all components before making any
connections.
B If the cables necessary for connecting a component to the system are not
included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.
B If there is a lot of jitter in the video signal which is input from the video
source, the picture on the screen may flicker. In such cases, it will be
necessary to connect a TBC (time base corrector).
B The projector has built-in speakers. However, you will need to connect a
separate audio system to the AUDIO OUT jack if your needs specify high
sound volumes. No sound will come out of the projector's built-in speakers
while the AUDIO OUT jack is being used.
B It may not be possible to connect some types of computer. Refer to the list
of compatible signals on page 61.
B The pin layout and signal names for the S-VIDEO IN connector are shown
below.
# $
& %
External view
B The pin layout and signal names for the RGB/YP
connector are shown below.
- 1
(
# '
External view
22
All manuals and user guides at all-guides.com
Pin No.
#
Earth (Luminance signal)
$ Earth (Color signal)
%
Luminance signal
& Color signal
Pin No.
#
R/P
R
$ G/G·SYNC/Y
,
% B/P
B
.
SDA
/ HD/SYNC
0
VD
1 SCL
Pin + is spare.
Pins &–*, , and - are for earth.
Pins . and 1 functions are only valid when
supported by the computer.
Signal
P (RGB1 IN/RGB2 IN)
B R
Signal
B The pin assignments on the
(interface with TMDS conne
2
Pin No. Signal
#
T.M.D.S data 2-
$ T.M.D.S data 2+
%
T.M.D.S data 2/4 shield
& T.M.D.S data 4-
' T.M.D.S data 4+
(
DDC clock
) DDC data
*
-
+ T.M.D.S data 1-
, T.M.D.S data 1+
-
T.M.D.S data1/3 shield
. T.M.D.S data 3-
Vie