Table of Contents
Advertisement
Mounting the Projector
NOTE:
If you buy a third-party mount, please use the correct screw size. Screw size
can vary depending on the thickness of the mounting plate.
1.
To ensure the most secure installation, please use a ViewSonic® wall or ceiling
mount.
2. Ensure the screws used to attach a mount to the projector meet the following
specifications:
•
Screw type: M4 x 8
•
Maximum Screw length: 8 mm
NOTE:
•
Avoid installing the projector near a heat source.
•
Keep at least a 10 cm gap between the ceiling and the bottom of the
projector.
LS550W / LS550WH
199
LS500W / LS500WH
199
19
Advertisement
Table of Contents
