Mounting The Projector; Using The Security Bar - ViewSonic V52HD User Manual

Mounting the Projector

NOTE: If you buy a third party mount, please use the correct screw size. Screw
size can vary depending on the thickness of the mounting plate.
1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling
mount.
2. Ensure the screws used to attach the mount to the projector meet the following
specifications:
• Screw type: M4 x 8
• Maximum Screw Length: 8 mm
3. Place the power adapter within the designated area and secure it with a cable
strap.
CAUTION:
• Avoid installing the projector near a heat source or air conditioner.
• Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of
the projector.

Using the Security Bar

To help prevent the projector from being stolen, use a security slot locking device to
secure the projector to a fixed object.
55 mm 55 mm
23
Security Bar
82.3 mm