Software; Using The Smart Panel To Calibrate The Screen - Wetif RMI80-D User Manual

Software

Using The Smart Panel to Calibrate The Screen

Select the icon on the desktop to launch the Calibration program and
the following panels will appear.
Select Tool, then select 4 Point Calibration. A red flashing X will appear
in the lower-left corner of the screen, then tap or click the X and hold it
until the green X appears. Follow the same steps to finish the other three
red X calibration.
Note: Make sure to calibrate the screen before your first screen rotation.
 The First Installation
The following panel will appear if the user installs the software setup
procedure oneself. Users have to install Microsoft .NET Framework before
the first installation of Hot Key & Smart Panel Utilities.
Select "Yes" to install Microsoft .NET Framework immediately or users can
download Microsoft .NET Framework from Microsoft website later.
CHAPTER 4 – Specifications & Software
33