Page 1
Medical Mobile Tablet DT313Cmed/ DT313Tmed INTRODUCTION Thank you for acquiring the DT313C/Tmed, part of a line of rugged tablets. Featuring a slim, robust enclosure, the DT313C/Tmed with a 13.3” TFT display is powered by the Intel® processor, offering optimal combinations of performance and power savings.
Page 2
Power/Battery LED Status: • Blue indicates the battery is 25% to 100% charged • Blinking blue indicates the battery is charging • Orange indicates that the battery is between 11% to 25% Battery/Power LED • Blinking Orange indicates that the battery is below 10% PRECAUTIONS •...
Page 3
OPERATION Start Up If the power up (from Standby mode or otherwise) is successful, the appropriate Powering ON and OFF interface will be displayed after a launch sequence of several seconds. The wireless To activate the DT313C/Tmed, push and quickly release the Power Button. The display LAN connection may take 10-15 seconds to be established.
Page 4
USING THE MOBILE TABLET Federal Communication Commission Interference Peripherals Support This equipment has been tested and found to comply with the limits for a Through its USB port, the DT313C/Tmed supports a wide range of USB-based Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are peripherals.
Need help?
Do you have a question about the DT313Cmed and is the answer not in the manual?
Questions and answers