Table of Contents
Advertisement
RUGGEDCOM WIN5237-IS
Installation Guide
2
Figure 1: RUGGEDCOM WIN5237-IS
1. RSSI LEDs 2. W.LINK LED 3. PWR LED 4. ETH/PWR Port 5. Chassis Ground
RSSI LEDs
W.LINK LED
PWR LED
ETH/PWR Port
Description
1
RSSI
W.LINK PWR
3
Indicates the received signal strength.
LED
Indicates when the subscriber unit is connected with a base station.
State
Green (Solid)
Green (Blinking)
Indicates when power is supplied to the subscriber unit.
State
Green
Off
A copper RJ45 PoE port for data and power. For more information about connecting data and
power, refer to
ETH/PWR
RSSI
W.LINK PWR
4
Section 2.6, "Connecting Power and
5
RSSI Level
< -90
-85 to -90
-80 to -85
-75 to -80
-70 to -75
-65 to -70
-20 to -60
> -20
Description
Subscriber unit is connected to the base
station and receiving services.
Link between the subscriber unit and the
base station is down.
Description
Power is on.
Power is off.
Data".
Chapter 1
Introduction
3
Advertisement
Table of Contents
