Safety Cut-Out For The Rings - AEG COMPETENCE E8140-1 Operating Instructions Manual

Safety Cut-Out for the Rings

If, after a certain period of time, one of the rings is not switched off or
the heat setting not changed, the ring will switch itself off automati-
cally.
- will appear in the ring display for the ring that has been switcheed
off.
The rings are switched off at:
• Heat setting
• Heat setting
• Heat setting
• Heat setting
To restart after a safety cut-out
To restart after a safety cut-out turn the ring switch back to the off
position.
The ring can then be used again.
. .
1 - 2 after 6 hours
. .
3 - 4 after 5 hours
. .
4 - 5 after 4 hours
. .
6 - 9 after 1.5 hours
17