Technical Data; General Specifications; Material Delivery Properties - Krautzberger MP-560 Operating Instructions Manual

12

Technical data

12.1

General specifications

Specification
Delivery rate (with reference to water, free flow) 54
Material connection (input and output)
Max. temperature of the coating material used
Maximum pressure
Max. permitted operating pressure
Compressed-air connection
Min. air intake pressure
Max. air intake pressure
Max. stroke (double strokes)
Recommended number of strokes (double
strokes)
Weight
Noise pressure level (at 8 bar and 100 DS)
Transmission ratio
Compressed air supply
12.2

Material delivery properties

Material
Paint (with solvent)
Water-based paint, dispersions, wood preservatives
Water
Oils, heating oils, diesel fuel
Emulsions, soap, detergents
Alcohol, glazes, latex
Lime sludge
Cell and fibre materials
Sludge, mash, pastes
If in doubt, contact Krautzberger Customer Care about the suitability of materials that are not
listed. In special cases we will determine the suitability in a trial.
GB–44
Operating instructions
Value
Thread 1 female thread
0 ... +50
8 (116)
8 (116)
1/4 female thread
4 (58)
8 (116)
120
100
50
80
1:1
oil-free, filtered
Suitability
good
good
good
good
good
limited
limited
unsuitable
unsuitable
T-Dok-300-GB-Rev.1
Unit
l/min
Inches
°C
bar (psi)
bar (psi)
Inches
bar (psi)
bar (psi)
DS/min
DS/min
kg
dB(A)
mail@krautzberger.com, www.krautzberger.com