Childproof lock
Activating the childproof
lock
Example of Easy-Care 40 °C
programme:
5sec.
Deactivating the childproof
lock
34
You can secure your washer-dryer to prevent selected
functions from being inadvertently changed.
If the childproof lock has been selected:
– no changes can be made while the programme is
running,
– the symbol
@
inadvertently changed,
– should the appliance be switched off and on while
a programme is running, the programme will
continue at the point at which it was interrupted,
– when the programme ends, the duration time is
showed as 0:01, the loading door cannot be
opened, deactivate the childproof lock, the door
can be opened while the display shows -0-.
Set the programme selector to the required
■
programme and, if required, select other settings.
Load the laundry and close the loading door.
■
Touch the Start/Pause A button. The programme
■
starts.
² Release the Start/Pause A button.
Touch the 5 button and hold down (for approx. 5
■
seconds) until the @ symbol is displayed.
Release the 5 button, the childproof lock is
■
activated, the symbol is permanently on.
The childproof lock should be deactivated before
making programme changes or ending programmes
at selected programme.
When a different programme has been selected,the
@ symbol will continue to flash and the childproof
lock can be deactivated.But the running programme
will be terminated and return to ready state.
Touch the 5 button and hold down (for approx. 5
■
seconds) until the @ symbol goes out.
² If there is a power failure, the childproof lock
remains on.
flashes if a programme setting is