Installing, Connecting And Transporting - Bosch Avantixx WVD24460GB Operating And Installation Instructions

Wash + dry
Table of Contents

Advertisement

Installation instructions

Installing, connecting and transporting

Safety instructions
Standard
accessories
53
m
Risk of injury!
The washer-dryer is heavy. Take care when lifting it.
Caution
Frozen hoses may tear/burst. Do not install the
washer-dryer in an area where there is a risk of frost or
outdoors.
The washer-dryer may be damaged. Do not lift the
washer-dryer by its projecting parts (e. g. door).
In addition to the safety information listed here, the
local water and electricity supplier may have special
requirements.
If in doubt, have the appliance connected by a
specialist.
– Water-inlet hose.
– Elbow for attaching the drainage hose e.g. to the
sink.
– Power cord.
Moisture in the drum is due to the final inspection
which every washer-dryer undergoes before it leaves
the factory.
Depending on the connection situation, the following
part is also required:
Ø
– 1 hose clip
required for connection to a siphon.
The bag contains:
– Covers for holes left by removing the transport
bolts.
24-40 mm (DIY store) is also

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avantixx wvd24460

Table of Contents