Electrolux EEQ47200L User Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Dishwasher
  5. EEQ47200L
  6. User manual

Electrolux EEQ47200L User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EEQ47200L
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Electrolux EEQ47200L

Summary of Contents for Electrolux EEQ47200L

  • Page 1 EEQ47200L Dishwasher User Manual...

  • Page 2: Table Of Contents

    13. ADDITIONAL TECHNICAL INFORMATION...........24 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa) Follow the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •...
  • Page 5 ENGLISH • Make sure not to cause damage to • If the water inlet hose is damaged, the mains plug and to the mains immediately close the water tap and cable. Should the mains cable need to disconnect the mains plug from the be replaced, this must be carried out mains socket.

  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters Cutlery basket Rating plate Lower basket Salt container Upper basket Air vent 3.1 Beam-on-Floor The Beam-on-Floor is off when the appliance is The Beam-on-Floor is a light that is deactivated.

  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/Off button EXTRAS buttons Delay Start button AUTO Sense button Display MY TIME selection bar 4.1 Display 4.2 ECOMETER ECOMETER The ECOMETER indicates how the programme selection impacts energy and water consumption. The more bars are on, the lower the consumption is. indicates the most environmentally friendly programme selection for a A.

  • Page 8: Before First Use

    5. BEFORE FIRST USE 1. Make sure that the current level of 4. Carefully shake the funnel by its the water softener agrees with the handle to get the last granules inside. hardness of the water supply. If 5. Remove the salt around the opening not, adjust the level of the water of the salt container.

  • Page 9: Programme Selection

    ENGLISH 3. Remove the spilled rinse aid with an You can turn the selector of absorbent cloth to prevent too much the released quantity (B) foam. between position 1 (lowest 4. Close the lid. Make sure that the quantity) and position 4 or 6 release button locks into position.
  • Page 10 6.4 Programmes overview Pro‐ Type of load Degree of Programme phases EXTRAS gramme soil Quick • Crockery • Fresh • Wash 50 °C • ExtraPower • Cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry •...

  • Page 11: Basic Settings

    ENGLISH Consumption values Water (l) Energy (kWh) Duration (min) Programme Quick 9.4 -11.4 0.57 - 0.69 Pre-rinse 3.7 - 4.5 0.02 - 0.05 9.3 - 11.4 0.82 - 0.94 1h 30min 9.1 - 11.1 1.01 - 1.13 2h 40min 9.2 - 11.2 0.96 - 1.08 0.921 AUTO Sense...
  • Page 12 Number Settings Values Description Latest pro‐ Enable or disable the automatic selec‐ gramme selec‐ Off (default) tion of the most recently used pro‐ tion gramme and options. 1) For more details, refer to the information provided in this chapter.
  • Page 13 ENGLISH German de‐ French de‐ mmol / l Clarke de‐ Water softener grees (°dH) grees (°fH) grees level <4 <7 <0.7 < 5 1) Factory setting. 2) Do not use salt at this level. Regardless of the type of detergent during the drying phase and remains used, set the proper water hardness ajar.

  • Page 14: Daily Use

    7.6 Latest programme selection setting mode while the programme is running. You can set the automatic selection of To enter setting mode, press and hold the most recently used programme and options. simultaneously about 3 seconds. The latest programme that was...
  • Page 15 ENGLISH 8.1 Using the detergent • The display shows the programme duration. 2. Close the appliance door to start the programme. 8.4 How to activate EXTRAS 1. Select a programme using MY TIME selection bar. 2. Press the button dedicated to the option you want to activate.

  • Page 16: Hints And Tips

    The appliance senses the type of load Make sure that there is and adjusts a suitable wash cycle. detergent in the detergent During the cycle, the sensors operate dispenser before you start a several times and the initial program new programme.
  • Page 17 ENGLISH 1''). Follow the instructions on the • The filters are clean and correctly packaging. installed. • Select a programme according to the • The cap of the salt container is tight. type of load and the degree of soil. •...

  • Page 18: Care And Cleaning

    10. CARE AND CLEANING 10.2 Internal cleaning WARNING! Before any maintenance • Carefully clean the appliance, other than running the including the rubber gasket of the programme Machine Care, door, with a soft damp cloth. deactivate the appliance and •...
  • Page 19 ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4.

  • Page 20: Troubleshooting

    3. To install the spray arm back, press it downwards. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. 11. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre.
  • Page 21 ENGLISH Problem and alarm code Possible cause and solution The programme does not • Make sure that the appliance door is closed. start. • If the delay start is set, cancel the setting or wait for the end of the countdown. •...
  • Page 22 Problem and alarm code Possible cause and solution The appliance trips the cir‐ • The amperage is insufficient to supply simultaneous‐ cuit-beaker. ly all the appliances in use. Check the socket amper‐ age and the capacity of the meter or turn off one of the appliances in use.
  • Page 23 ENGLISH Problem Possible cause and solution Unusual foam during wash‐ • Use the detergent designed specifically for dish‐ ing. washers. • There is a leak in the rinse aid dispenser. Contact an Authorised Service Centre. Traces of rust on cutlery. •...

  • Page 24: Product Information Sheet

    12. PRODUCT INFORMATION SHEET Trade Mark Electrolux Model EEQ47200L 911536464 Rated capacity (standard place settings) Energy efficiency class Energy consumption in kWh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. The actual energy consumption will depend on how the appli‐...
  • Page 25 ENGLISH Water supply max 60 °C Cold water or hot water 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. 14.
  • Page 26 www.electrolux.com...
  • Page 27 ENGLISH...
  • Page 28 www.electrolux.com/shop...

Table of Contents