Table of Contents
Advertisement
BLUETOOTH SPEAKER
The scooter has a powerful built-in wireless speaker so you can play
your music while riding.
PAIRING THE SPEAKER
1) Turn on your scooter, and the speaker will "Ping" to announce that
it's waiting for a Bluetooth
connection. This will indicate your scooter
®
speaker is now in pairing mode.
2) Place the scooter and the Bluetooth
device to which you would
®
like to pair it within the operating distance. We recommend keeping
the two devices no further than 3 feet apart during pairing.
3) Ensure Bluetooth
is enabled on your phone or music device. Refer
®
to manufacturer's instructions for how to enable Bluetooth
on your
®
device.
4) Once you have activated Bluetooth
on your device, select the
®
option "H1-ALPRO" from the list of available Bluetooth
devices.
®
5) If required, enter the PIN code "000000" and confirm the entry.
6) The scooter will say "Paired" when successfully paired.
7) Please note, pairing mode on the scooter will last for two minutes. If
no devices are paired after two minutes, the scooter speaker will
automatically return to standby mode.
8) If pairing is unsuccessful, turn off the scooter first and re-pair
following the aforementioned steps.
9) If your smart phone is out of range, or the battery is low on your
scooter, your speaker may disconnect from your smart device, and
the hoverboard will say "Disconnected." To reconnect, follow the
aforementioned steps, or recharge your scooter.
NOTE: Once you have paired the scooter speaker with a device, the
speaker will remember this device and will pair automatically when
the device's Bluetooth
is activated and in range. You do not need
®
Mph
to re-pair any previously connected devices.
Your scooter can pair up to two multi-point devices. You can
reconnect a previously paired device without going through the
pairing or PIN process on up to two devices.
LISTENING TO MUSIC
Once the Bluetooth speaker is paired to your device, you can stream
music wirelessly through it. Select the track you wish to listen to on
your device to listen via the speaker. All volume and track controls will
be made using your music device. Should you encounter any
problems while streaming, please refer to your device's user manual.
17
Advertisement
Table of Contents
