Display Functions - Miele G 5892 Operating Instructions Manual

Guide to the appliance

Display functions

The display is used to select or set the
following:
- the program
- the Timer
- the Settings 
The display can show the following:
- the program stage
- The estimated time left for the pro-
gram to run
- Any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
Press the  button to switch the dish-
washer back on.
20
The OK button is used to confirm a
message or setting and also to move to
the next menu or another level.
Under  More, a scroll bar  will ap-
pear in the right of the display. This of-
fers further options. These options can
be shown using the  buttons.
You can alter the dishwasher's controls
to suit changing requirements in the
"Settings" menu (see "Settings").
The option which is selected will have a
check  next to it.
To exit a sub-menu again, press the
Back button.
If you do not press any buttons for sev-
eral seconds, the display will revert to
the previous menu. You will then have
to enter your settings again.