Filling The Salt Reservoir - Miele G 5892 Operating Instructions Manual

Filling the salt reservoir

Before filling the salt reservoir for the
first time, you must fill it with approx.
1 l of water to enable the salt to dis-
solve.
Once the dishwasher has been used
for the first time, there is always suffi-
cient water in the reservoir.
 Remove the lower basket from the
wash cabinet and unscrew the salt
reservoir cap.

Risk of corrosion due to saline
solution.
Water or saline solution will run out
of the reservoir when the cap is
opened. Salt solution that runs out
can cause corrosion in the wash
cabinet and to the wash items.
The cap should therefore only be re-
moved in order to refill the salt reser-
voir.
 Fill the salt reservoir with approx. 1 l
of water (first use only).
Before using for the first time
 Place the funnel provided over the
salt reservoir and carefully fill with re-
activation salt until the reservoir is
full. The salt reservoir holds up to 2.2
lb (1 kg) of salt, depending on the
type of salt used.
 Clean off salt residues from around
the salt reservoir opening. Next,
screw the salt reservoir cap on again
firmly.
 Immediately after filling the salt reser-
voir and each time you remove the
salt reservoir cap, run the  150°F
(65°C) QuickIntenseWash program
with the  Express program option
selected without wash items in the
dishwasher to dissolve and remove
any traces of salt from the wash cabi-
net.
27