Table of Contents
Advertisement
Energy saving cooling mode
This mode minimizes power consumption dur-
ing cooling and increases the set temperature
to the optimal level for a more comfortable
environment.
|
1
Press
to turn the power on.
f
2
Press
repeatedly to select the cooling
operation.
P
3
Press
.
G
-
is displayed on the display screen.
NOTE
!
• This function may not be supported,
depending on the model.
• Possible, Different temperature is dis-
played on between remote controller
and air conditioner during operation.
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
\
1
Press
to turn on/off the lamp on the
front grill.
NOTE
!
This function may not be supported,
depending on the model.
°C/°F Conversion
The unit converses from °C to °F or from °F
to °C if Room Temperature KEY is pressed for
5 seconds.
ADVANCED FUNCTIONS
Operating the air conditioner
without the remote control
You can use the On/Off button of the indoor
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
1
Open the front cover.
- Lift up both sides of the cover slightly.
* The feature can be changed according to the
type of model.
2
Press the On/Off button.
* The feature can be changed according to the
type of model.
- For cooling and heating models, the oper-
ation mode changes, depending on the
room temperature.
Room temp.
Set temp.
Below
24°C(75.2°F)
21°C(69.8°F)
Above
21°C(69.8°F)
And
23°C(73.4°F)
Below
24°C(75.2°F)
Above
22°C(71.6°F)
24°C(75.2°F)
- For cooling-only models, the temperature
is set to 22°C (71.6°F)
15
ON/OFF
button
Operation
mode
Heating
operation
Dehumidify-
ing operation
Cooling
operation
Advertisement
Table of Contents
