Table of Contents
Advertisement
ADVANCED FUNCTIONS
16
Auto Changeover operation
This mode changes the operation mode auto-
matically to maintain the set temperature
at ±2°C.
|
1
Press
to turn on the power.
f
2
Press
repeatedly to select the auto
changeover operation.
C
-
is displayed on the display screen.
G
H
3
Press
or
to set the desired temper-
ature.
- The temperature range is 18°C - 30°C.
g
4
Press
repeatedly to select the fan
speed.
NOTE
!
• This function may not be supported,
depending on the model.
°C/°F Conversion
The unit converses from °C to °F or from °F
to °C if Room Temperature KEY is pressed for
5 seconds.
Energy saving cooling mode
This mode minimizes power consumption dur-
ing cooling and increases the set temperature
to the optimal level for a more comfortable en-
vironment.
|
1
Press
to turn on the power.
f
2
Press
repeatedly to select the cooling
operation.
P
3
Press
.
G
-
is displayed on the display screen.
NOTE
!
• This function may not be supported, de-
pending on the model.
• During Energy Saving Cooling mode,
temperature shown at the unit display
may be different with the one shown at
remote control.
• Possible, Different temperature is dis-
played on between remote controller
and air conditioner during operation.
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
G
1
Press
repeatedly to set the brightness
to the desired level.
NOTE
!
• This function may not be supported,
depending on the model.
Advertisement
Table of Contents
