Gazer MMR5014 User Manual page 12

Note: Use the remote control that comes in the supply package to
set up and control the mirror.
1. Interface language setting. Stop the recording by pressing SEL/
REC, then press MENU to access the video settings menu. Press MENU
again to return to the main settings. Press UP/DOWN to navigate to
«Language» and select the interface language, then press MENU to exit
from the settings and resume the recording by pressing SEL/REC.
2. Date and time setting. The mirror allows adding date and time
watermarks to recorded videos. To configure date and time settings, stop
recording by pressing SEL/REC, then press MENU to access the video
settings menu. Press MENU again to return to the main settings. Press
UP/DOWN to navigate to «System time» and configure it as required,
then press MENU to exit from the settings and resume the recording by
pressing SEL/REC.
3. Video resolution setting. The DVR supports the following video
recording resolutions: 2560x1080 30fps; 2304x1296 30fps; 1920x1080
45fps; 1920x1080 30fps; HDR1920x1080 30fps; 1280x720 60fps;
1280x720 30fps for MMR51xx/MMR71xx/MUR5100/MUR7100 models and
1920x1080 30fps; HDR1920x1080 30fps; 1280x720 60fps; 1280x720
30fps for MMR50xx/MMR70xx/MUR5000/MUR7000 models. To select the
recording resolution, first stop the recording by pressing SEL/REC and
then switch to the settings menu by pressing MENU. Press UP/DOWN to
navigate to «Video resolution» and select the required value, then press
MENU to exit from the settings and resume the recording by pressing
SEL/REC.
4. Loop recording. To enable/disable the DVR's loop recording function,
first stop the recording by pressing SEL/REC and then press MENU
to access the settings menu. Press UP/DOWN to navigate to «Loop
recording» and select the required value, then press MENU to exit from
the settings and resume the recording by pressing SEL/REC.
Recommendation:
video clips allows minimizing pauses between them.
5. Automatic power-up on ACC signal. The mirror can switch to
the recording mode automatically when АСС signal is available (this
function is disabled by default). To disable this function, first stop the
recording by pressing SEL/REC, then switch to the settings menu by
Usage
Selecting the shortest duration of recorded
Автотовари «130»
ENG
11