Electrolux CVE614 User Manual page 10

operating the programmable clock
5 button programmable clock (cont)
Setting the oven function
1. Turn the oven FUNCTION selector clockwise to select
the desired oven function. The default temperature for
that function will be shown on the display.
2. After 5 seconds from the last change, the oven will
begin heating and the "Elapsed time" commences on
the display.
Changing the oven temperature
1. Toggle the TEMPERATURE selector left
as required to set the desired cooking temperature.
The temperature setting changes in increments of 5°C.
2. The set temperature is displayed for 5 seconds from
the last change.
NOTE: The temperature can be adjusted at any time.
Oven temperature cannot be changed for the Defrost or
Pyro function.
Setting the cooking duration
1. Select the desired oven function and cooking temperature.
2. Press "Clock" button until the COOK TIME symbol
appears flashing.
3. Set the desired cooking duration "Minutes" by using
buttons while the COOK TIME symbol
4. Press the CLOCK button and the cooking duration "Hours"
will flash and can be set in the same manner.
5. After 5 seconds from the last change, the COOK TIME
symbol will stop flashing confirming the cooking
duration is set.
6. A countdown of the "Cooking time remaining" will be
shown on the display.
7. When the set time has elapsed, a signal will sound and
the oven will turn off. To stop the signal, press any button
on the clock and then turn the oven FUNCTION selector
to "Off".
NOTE: Do not forget to add pre-heating time if necessary.
Cooking duration cannot be set for the Rapid Heat function.
The cooking duration can be cancelled at any time by turning
the "Function" selector to "Off".
Checking the oven temperature
To check the actual temperature inside the oven, press any
button on the controller to display the temperature.
10 OPERATING THE PROGRAMMABLE CLOCK Built-in Cooking
Setting the cooking end time
1. Select the desired oven function and cooking temperature.
2. Press CLOCK button until the END TIME symbol
appears flashing.
3. Set the desired time of day "Hours" to finish cooking by
pressing
is flashing.
4. Press the CLOCK button and the time of day "Minutes"
to finish cooking will flash and can be set in the same
manner.
or right
5. After 5 seconds from last change, the END TIME symbol
is set.
6. The "Cooking end time" will be shown on the display.
7. When the set time has elapsed, a signal will sound and
the oven will turn off. To stop the signal, press any button
on the clock and then turn the oven FUNCTION selector
to "Off".
NOTE: Cooking end time cannot be set for the Rapid Heat
function. The cooking duration can be cancelled at any time
by turning the "Function" selector to "Off".
Setting the delayed start cooking time
or
1. Program the COOK TIME and END TIME as described
is flashing.
in the relevant sections. Once both the COOK TIME
and END TIME have been set, the COOK TIME and
END TIME indicators will stop flashing and the "Set
temperature" will be displayed.
NOTE: Do not forget to add pre-heating time if necessary.
Delayed start cooking time cannot be set for the Rapid Heat
function. The delayed start cooking time can be cancelled at
any time by turning the "Function" selector to "Off".
Setting the minute minder
1. Press the
2. Set the countdown time "Seconds" by using
buttons while the minute minder symbol
3. Press the
flash and can be set in the same manner.
4. Press the
will flash and can be set in the same manner.
5. After 5 seconds from the last change, the "Minute minder"
symbol
or buttons while the END TIME symbol
will stop flashing confirming the cooking end time
button and the "Minute minder" symbol
begins to flash.
button and the countdown time "Minutes" will
button and set the countdown time "Hours"
will stop flashing confirming it has been set.
or
is flashing.