LG WT13BS6H Owner's Manual page 23

To Use the Air Dry Function
When you select Air Dry, you can reduce the drying
time by minimizing the moisture that remains
within the clothes.
• Press the Spin button for 3 seconds to select and
press the POWER button to deselect.
Using Special Options
You can customize the programmes by using the
following special options:
Turbo Wash
Adding this option reduces the programme time
but the similar washing results will be provided.
Strong Wave
Use this option to change the strong water wave.
• It is set to medium water wave by default and it
is not indicated on the display.
Follow the next steps to use a special
option.
1
Press the POWER button.
2
Select a washing programme.
3
To use special options, press Turbo Wash or
Strong Wave button.
4
Press the START/PAUSE button.
Using Basic Options
Time Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the POWER button.
2
Select a washing programme.
3
Press the Time Delay button to set the
required delay ending time.
4
Press the START/PAUSE button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
• This function cannot be set for less than 3 hours.
• To cancel this function, press Time Delay button
repeatedly until the reservation is cancelled or
press the POWER button to turn off and on
power.
Soak
This option can be selected to wash heavily soiled
clothes by soaking them in water for some time to
loosen dirt and grime.
• When this option is activated, the
• To activate this option, press and hold the Turbo
Wash button for 3 seconds.
• To change the soak time on the display or
deactivate this option, press the Turbo Wash
button while this option is activated.
NOTE
• While Turbo Wash is activated, the Soak option
can not be set even if the Soak button is pressed.
Hot Wash / Cold Wash
Press the Hot Wash and/or Cold Wash buttons to
select hot water, cold water, or hot and cold water
(warm water).
• If Hot Wash is selected, washing will be done
with hot water and rinse will be done with cold
water.
• Under normal and standard user environments,
warm water will enter the drum when both hot
water and cold water are selected.
NOTE
• Delicates programme is cold water only. If hot
water is used, the clothes can be damaged.
OPERATION
23
icon is lit.
u