Lexus RX 450h 2014 Owner's Manual page 443

3-3. Using the Lexus Display Audio system
STEP 3
Reconnecting to the Bluetooth
■
If the system cannot connect due to poor signal strength with the "POWER" switch
in ACCESSORY or ON mode, the system will automatically attempt to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this case, con-
nection must be made manually, or the phone must be re-selected.
Connecting the phone while Bluetooth
■
®
Bluetooth audio will stop temporarily.
●
It may take time to connect.
●
Making a call
Once the Bluetooth
following procedure:
■ Dialing
Display the "Phone" screen. (→P. 437)
STEP 1
Select "Dial" on the "Phone" screen.
STEP 2
STEP 3
442
®
phone
®
audio is playing
®
phone is registered, you can make a call using the
Select the device to connect.
A message is shown if connection
has been successful.
If connection fails, a message will
be displayed and connection will
be re-attempted.
Input the phone number.
To delete the inputted phone
number, select
For the first digit, you can enter "+"
∗
by selecting " " for a while.
.