Table of Contents
Advertisement
The initialization operation
■
Make sure to carry out initialization after adjusting the tire inflation pressure.
●
Also, make sure the tires are cold before carrying out initialization or tire infla-
tion pressure adjustment.
If you have accidentally turned the "POWER" switch off during initialization, it is
●
not necessary to press the reset switch again as initialization will restart auto-
matically when the "POWER" switch has been turned to ON mode for the next
time.
If you accidentally press the reset switch when initialization is not necessary,
●
adjust the tire inflation pressure to the specified level when the tires are cold,
and conduct initialization again.
When the initialization of the tire pressure warning system has failed
■
Initialization can be completed in a few minutes. However, in the following cases,
the settings have not been recorded and the system will not operate properly. If
repeated attempts to record tire inflation pressure settings are unsuccessful, have
the vehicle inspected by your Lexus dealer.
When operating the tire pressure warning reset switch, the tire pressure warn-
●
ing light does not blink 3 times.
After carrying out the initialization procedure, the tire pressure warning light
●
blinks for 1 minute then stays on after driving for 20 minutes.
4-3. Do-it-yourself maintenance
4
675
Advertisement
Table of Contents
