Summary of Contents for Emerson AVANT ECOCF921VNB01
Page 1
Satin White CF921VNB01 - Venetian Bronze 16.6 Net Weight: Lbs. Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-654-3545 Part No. F40BP74330003 Form No. BP7433-3 www.emersonfans.com Revision: 131015...
Electric Co., Ltd. come to a complete stop. WARNING: To avoid fire, shock or injury, do not use an Emerson or any other brand of control not specifically approved for this fan. Additional Safety Instructions for Installation WARNING: This product is designed to use only those 1.
Emerson Electric Co. Substitution of parts or Switch Housing Assembly accessories not designated for use with this product Remote Control by Emerson Electric Co. could result in personal injury or property damage. 1. Check to see that you have received the following parts: NOTE: If you are uncertain of part description, refer to exploded view illustration.
This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Your Emerson ceiling fan comes supplied with a Tools Needed for Assembly Fan/Light Remote Control which consists of a receiver...
3. Ceiling Fan Assembly 1. Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 1). Remove the pin from the HANGER BALL downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in Step 4.
Page 6
3. Ceiling Fan Assembly (continued) 3. Make sure the grommet is properly installed in the SETSCREW DOWNROD coupling cover, then slide the coupling cover on the downrod until it rests on the motor housing. Place the HANGER ceiling cover over the downrod. Be sure that the BALL ceiling cover and the coupling cover are both oriented correctly (Figure 3).
To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, Please call Emerson technical support balancing the blades or cleaning the fan. Do not insert 1-800-654-3545 if you have any questions foreign objects in between rotating fan blades.
Securely connect wires with wire connectors supplied. 2. Securely connect the fan motor white wire to the NOTE: If you are using an Emerson Light Fixture with your fan, see Light Fixture Owner’s Manual for supply white (neutral) wire using wire connector wiring.
Setting Operating Frequency of Remote Control. Preset Memory Feature CODE SWITCHES Your Emerson receiver is equipped with a preset memory feature. If the AC supply to the receiver is BATTERY SR600 REMOTE CONTROL COMPARTMENT...
Page 10
6. Remote Control Procedures (continued) Your remote control has code switches which must be set in one of 32 possible code combinations. The five levers (numbered 1, 2, 3, 4, and 5) on the switches are factory-set in the ON (up) positron. Change the switch settings as follows (Figure 14).
4. Ceiling Fan Blades (see store or catalog). Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury WARNING or property damage. The use of any other control not specifically approved for this fan could result in fire, shock and personal injury.
10. Optional Accent Kit Installation CAUTION: To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before installing light kit assembly. COUPLING COVER SCREWS (3) 1. Remove the three coupling cover screws and slide COUPLING (RETAIN FOR LATER COVER the coupling cover up the downrod for installation of...
11. Trouble Shooting WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit 1.
Page 14
INSTRUCTION TO THE USER (if device contains a digital device) This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 15
Notes emersonfans.com Please contact 1-800-654-3545 for further assistance ETL Model No.: CF921...
What We Will Do To Correct Problems: If during the one (1) year warranty period the motor or any component or accessory of your Emerson Ceiling Fan is defective in materials or workmanship, or if during the expected lifetime of the Emerson Ceiling Fan (when used in accordance with the User Manual or other instructions) the motor is defective in materials or workmanship, you must contact Emerson during the applicable warranty period.
Page 20
Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-654-3545 www.emersonfans.com Retain this manual for future use.