Brother S-1000A-5 Basic Operation Manual page 13

0873D
0865D
S-1000A
1. INSTALLATION
2. Remove the screw (5) and washer
(6) from the rear of the sewing
machine.
3. Place belt cover U (4) onto the
machine pulley.
4. Install belt cover U (4) to the sewing
machine with the screw (5) and
washer (6), and then install it to the
belt cover (1) with the two screws
(7) which are included
accessories.
5. Place belt cover D (8) so that it
overlaps the belt cover (1) by 2 - 3
mm, and then install it to the table
with the two screws (9) and two
washers (10).
as
6