Monte Carlo Fan Company BF1 Series Owner's Manual And Installation Manual page 7

Blade installation
Install blade bracket with blade by 3 blade screws and
washers provided. Tighten screws securely. Repeat this
process for remaining blades. (Fig. 11)
Remove shipping stabilizers from motor assembly.
Install the blade assembly to motor using the preinstalled
screws. Tighten screws securely. Repeat this process for
remaining blade assemblies. (Fig. 11)
Note: Tighten blade bracket screws twice a year.
Install fan pull chain to preassembled pull chain on fan. Pull
chain provided. (Fig. 12)
Forward/Reverse switch setting
Setting the reverse switch in the down position will result in
downward airflow and setting the switch in the up position
will result in upward airflow.
Note: Reverse switch must be set either completely down
or completely up for fan to function. If the reverse switch is
set in the middle position, fan will not operate. (Fig. 12)
Operation and Maintenance
Refer to operation and maintenance on the second page of
parts list.
© 2013 Monte Carlo Fan Company
shipping stabilizers
Pull chain
7
Screws
Blades bracket
Reverse switch
Screws
Fiber
washers
Blade
Fig. 11
Fig. 12
3/8/2013 /2013