Table of Contents
Advertisement
7.
Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
B150M-C D3
B150M-C D3 Serial port (COM) connectors
The COM module is purchased separately.
8.
Intel
B150 Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~6 [gray])
®
This connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s
signal cables.
B150M-C D3
B150M-C D3 Intel
•
•
1-18
SATA6G_4
SATA6G_5
SATA6G_3
SATA 6 Gb/s connectors
®
You must install Windows. XP Service Pack 3 or later version before using Serial
ATA hard disk drives.
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to
[AHCI].
COM2
COM1
PIN 1
PIN 1
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
SATA6G_6
SATA6G_2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
Chapter 1: Product introduction
Advertisement
Table of Contents
