Getting Started; Charging The Remote Control - Clifford Responder LC3 4706X Owner's Manual

Getting Started

Your Responder LC remote is powered by an internal rechargeable
battery that can only be serviced by an authorized Directed dealer.
Due to transit and storage time prior to your purchase, the battery
charge may have depleted. To ensure proper operation, check the
battery level and if not fully charged, use the provided cable to con-
nect to the USB port on a computer. See "Battery Information (Re-
sponder LC)" on page 43 and "Status Screen Icons" on page
8 for more information about the battery.

Charging the remote control:

1. Plug the USB end of the provided USB cable into the USB port
on a computer. Insert the mini-USB connector into the mini-USB
port located on the side of the remote control ("Responder LC
2-Way" on page 4). The text field will display
indicate the remote control is charging (The remote remains
operational while charging and can command the system).
2. Once fully charged the text field will display
3. The remote control is then ready for use. Disconnect the cable
from the remote control end first.
Note If the battery is excessively depleted when charging, func-
tionality may be delayed while it charges to the minimum
voltage required to operate the display, after which normal
charging resumes.
4
All manuals and user guides at all-guides.com
CHARGE
.
FULL
© 2013 Directed. All rights reserved.
to