•
Remote Beeps: Press
•
Car 2 feature: Press
Once the desired feature has been changed you can exit pro-
gramming by following the procedure described previously.
Remote Learning
2.
After entering the programming mode: Press and hold the
button,3 LED flashes and beeps indicates the remote is ready to
program to the system.
Per the instruction in Remote Pair under the Main Menu section
of this guide, following step 4 of Prepare the vehicle system to
be Paired with a new remote. Press the
seconds as the remote generates a security encryption and sends
it to the Control Center. The horn honks to indicate Pairing is
complete.
Once the desired feature has been changed you can exit pro-
gramming by following the procedure described previously.
40
40
All manuals and user guides at all-guides.com
to turn on/off.
to turn on/off.
button. Wait several
© 2013 Directed. All rights reserved.