Table of Contents
Advertisement
Available languages
Available languages
Circuit diagram
Temperature
sensor
Black
LED
adaptor
L
Green
E
N
Power plug
White
5.1
Refrigerant
BEWARE
!
The appliance contains in the refrigerant circuit the
refrigerant isobutane (R600a), a highly environ -
mentally compatible natural gas that is inflammable.
While transporting and installing the appliance ensure
that no parts of the refrigerant circuit are damaged.
Procedure if the refrigerant circuit is damaged:
• avoid open fire and ignition sources at all costs
• ensure that the room in which the appliance is located is well ventilated
28
Control board
L C N
Red
Overload
protector
Switch
C
Compressor
Lamp
Yellow
M
S
green
PTC Starter
6 Installation
6.1 Positioning
The appliance should be located in a well ventilated and dry room. The ambient
temperature affects the power consumption and correct function of the appliance.
Sufficient air circulation on the rear wall and upper edge of the appliance must
be warranty. For optimal ventilation of the appliance the minimum ventilation
crossections must be observed: i.e. position the refrigerator at least 100 mm
away from the wall, and furthermore a space of 20 mm must be left to the right
and to the left, and 300 mm at the top. If you wish to place the appliance on a
carpet, ensure that you use a solid and smooth base.
IMPORTANT
• The appliance must not be exposed to direct solar radiation.
• The appliance must not stand on heating elements, next to
a stove or other heat sources.
• The appliance must be positioned so that the mains plug
is accessible.
• The appliance may only stand in a location where the ambient
temperature corresponds to the climate classification for
which the appliance is designed.
29
Advertisement
Chapters
Table of Contents
