C-2 Compaq Flat Panel Monitor Rackmount (TFT5000R) Reference Guide
Country-Specific Requirements
Use the following table to identify the appropriate accredited agency in
your country.
Power Cord Set Requirements - By Country
Country
Australia
Austria
Belgium
Canada
Denmark
Finland
France
Germany
Italy
Japan
Norway
Sweden
Switzerland
United Kingdom
United States
Notes:
1.
Flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm
cord set fittings (appliance coupler and wall plug) must bear the certification mark of the
agency responsible for evaluation in the country where it will be used.
2.
Flexible cord must be Type SVT or equivalent, No. 18 AWG, 3-conductor. Wall plug must
be a two-pole grounding type with a NEMA 5-15P (15A, 125V).
3.
Appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration
number in accordance with the Japanese Dentori Law. Flexible cord must be Type VCT or
VCTF, 3-conductor, 1.0 mm
with a Japanese Industrial Standard C8303 (7A, 125V) configuration.
Table C-1
Accredited Agency
EANSW
OVE
CEBC
CSA
DEMKO
SETI
UTE
VDE
IMQ
JIS
NEMKO
SEMKO
SEV
BSI
UL
2
conductor size. Wall plug must be a two-pole grounding type
Applicable Note Numbers
1
1
1
2
1
1
1
1
1
3
1
1
1
1
2
2
conductor size. Power