Hp Lp2475W Model - HP LP2275w User Manual

HP LP2475w Model

Figure 3-3
Table 3-2 HP LP2475w Rear Components
Component
1 Cable Lock Provision
2 Master Power Switch
3 AC Power Connector
4 DisplayPort Connector
5 HDMI Connector
6 DVI-I Connectors
7 SPDIF Audio Connector
8 S-Video Connector
9 Composite Connector
10 Component Connectors
11 USB Upstream Connector
12 USB Downstream Connectors
13 USB Downstream Connectors
(side panel)
8 Chapter 3 Setting Up the Monitor
Rear Components
Function
Provides slot for use with cable security locks.
Turns off all power to the monitor.
Connects the AC power cord to the monitor.
Connects the DisplayPort signal cable to the monitor.
Connects the HDMI signal cable to the monitor.
Connects the DVI to VGA signal cable or DVI to DVI-D signal
cable to the monitor.
Connects an audio cable from a digital audio input on an
external receiver or amplifier to the monitor.
NOTE: The SPDIF connector is only used with an HDMI
video input. It does not provide audio for other video inputs.
Connects an S-Video signal cable to the monitor.
Connects a Composite signal cable to the monitor.
Connects Component signal cables to the monitor.
Connects the monitor USB hub cable to a host USB port/hub.
Connects optional USB devices to the monitor.
Connects optional USB devices to the monitor.