HP LP2275w User Manual page 34

Table 4-3 OSD Menu (continued)
Icon Main Menu
OSD Control
Video Input
Control (LP2275w
Model)
Video Input
Control (LP2475w
Model)
28 Chapter 4 Operating the Monitor
Submenu Description
●
●
●
Adjusts the position of the OSD menu on the screen.
Horizontal OSD Position Changes the viewing position of the OSD menu to the left or right
area of the screen. The factory default range is 50.
Vertical OSD Position Changes the viewing position of the OSD menu to the top or
bottom area of the screen. The factory default range is 50.
OSD Transparency Adjust to view the background information through the OSD.
OSD Timeout Sets the time duration in seconds that the OSD is visible after the
last button is pressed. The factory default is 30 seconds.
OSD Rotation Select landscape or portrait orientation.
Controls the video input signal for the monitor.
Switch Video Input Selects the video input signal (DVI-I-1 Digital, DVI-I-1 Analog, or
DisplayPort). Default is DVI-I-1 Digital.
Auto-Switch Input Turns the system's automatic video signal input to on or off. The
factory default is On.
Default Video Input Selects the default or primary video input signal (DVI-I-1 Digital,
DVI-I-1 Analog, or DisplayPort) when the monitor is connected to
two active and valid video sources.
Controls the video input signal for the monitor.
Default Video Input Forces one of the following as the default or primary video input
signal: DVI-I-1 Digital, DVI-I-1 Analog, DVI-I-2 Digital, or DVI-I-2
Analog, DisplayPort, HDMI, S-Video. Composite, Component, or
Auto-Detect. The factory default is Auto-Detect
NOTE:
activate functionality of the Video Input Detect Mode and Input
Switch Mode menu items.
Video Input Detect Mode NOTE:
activate functionality of the Video Input Detect Mode.
Controls the operation of the front panel Scan button. Set to:
●
●
Set On Time—sets the time you want the monitor to wake
up from sleep mode
Timer—sets the Sleep Timer feature On or Off. The default
setting is Off
Sleep Now—immediately sets the monitor to enter sleep
mode
The Default Video Input must be set to Auto-Detect to
The Default Video Input must be set to Auto-Detect to
Automatic Input Scan—pressing the Scan button
automatically scans through all video inputs for valid signals
Manual Input Scan—pressing the Scan button scans the
video inputs one at a time for valid signals