Hp Lp2475W Model - HP LP2275w User Manual

●
AssetControl
●
Compliant with the following regulated specifications:
◦
European Union CE Directives
◦
Swedish MPR II 1990

HP LP2475w Model

The LCD (liquid crystal display) monitor has an active matrix, thin-film transistor (TFT). The monitor
features include:
●
Large 60.96 cm (24-inch) diagonal viewable area display with 1920 × 1200 resolution, plus full-
screen support for lower resolutions
●
Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side
●
Picture-In-Picture (PIP) and Picture-Outside-Picture (POP) capability for viewing two video input
signals at the same time
●
Pivot capability to rotate display to portrait mode
●
Tilt, swivel, and height adjustment capabilities
●
Removable stand for flexible mounting solutions with HP Quick Release and VESA 100 mm
mounting holes
●
Video inputs support DisplayPort, HDMI, DVI (analog and digital), Composite, Component, and S-
Video signal inputs
●
One DVI to VGA signal cable and one DVI to DVI-D signal cable included
●
One DisplayPort signal cable included
●
One HDMI signal cable included
●
USB 2.0 hub with one upstream (connects to the computer) and six downstream (connects to USB
devices) ports
●
USB cable included to connect the monitor's USB hub to the USB connector on the computer
●
Accessory rail on monitor to accept optional mounted devices, such as an HP speaker bar
●
Plug and play capability if supported by the system
●
Privacy filter slots to insert filters (purchased separately) to block side screen viewing
●
Security slot provision on rear of monitor for optional cable lock
●
Cable management feature for placement of cables and cords
●
On-Screen Display (OSD) adjustments in several languages for ease of setup and screen
optimization
2 Chapter 1 Product Features